Abstract
BACKGROUND: A genetic algorithm (GA) optimized artificial neural network (ANN) model was developed to simulate selenite removal efficiency (SRe) and chemical oxygen demand (COD) removal efficiency (CRe) in a single‐stage inverse fluidized bed reactor (IFBR) operated under different hydraulic retention time (HRT) (12–48 h), and inlet selenite concentration (12.7–635 mg L−1). Multi‐objective optimization for SRe and CRe with the ANN model was adopted to estimate the pareto optimal solutions in the bioreactor system.RESULTS: GA optimized ANN topology suggested five neurons in the hidden layer, and the optimal data partitioning between training, test, and validation subsets (in 70:15:15 ratio) using cross‐validation. The average fitness for SRe and CRe of the resulting ANN model over training (R2 = 0.885), test (R2 = 0.967) and validation (R2 = 0.972) subsets were reasonably good. Sensitivity analysis suggested an increase in SRe and CRe with HRT, while an increase in inlet selenite concentration had a negative effect on SRe. Local interpretable model‐agnostic explanations and SHapley Additive exPlanations for the developed model suggested a positive coefficient of the predictors on CRe. Pareto optimal solution for SRe (92.87%–95.26%), and CRe (91.33%–99.35%) were suggested for HRT and inlet selenite concentration varying between 35.67 h and 36 h, and 0.1 g L−1 and 0.884 g L−1, respectively.CONCLUSIONS: The GA optimized ANN model could be exploited for the prediction of contaminant removal efficiencies in the bioreactor system with a fair degree of complexity (i.e., IFBR). Multiple objective pareto optimal solutions can identify the best operating conditions relevant for wastewater treatment. © 2023 Society of Chemical Industry (SCI).

This publication has 56 references indexed in Scilit: