Chemical Compatibility and Electrical Contact of LaNi0.6Co0.4O3–δ (LNC) between Crofer22APU Interconnect and La0.6Sr0.4FeO3 (LSF) Cathode for IT‐SOFC
- 30 April 2013
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 13 (3) , 398-403
Abstract
In order to simulate the contact situation of interconnect/contact layer/cathode in SOFC stacks, contact resistance and chemical compatibility of LaNi0.6Co0.4O3–δ (LNC) as contact layer between Crofer22APU interconnect and La0.6Sr0.4FeO3 (LSF) cathode was investigated at 800 °C in air for more than 1300 h using X‐ray diffraction (XRD), scanning electron microscopy (SEM) set‐up equipped with an energy dispersive X‐ray analyser (EDX) and area specific resistance (ASR) measurements. The XRD analysis reveals that multiple phases were formed during ASR test. The point microanalysis on cross‐section of Fe–Cr/LNC/LSF system, after ASR measurements, shows chromium within the porous contact material mainly concentrated close to interconnect, but no Cr, Ni, or Co was detected in the cathode. It was found between LNC and LSF cathode, a thin and uniform layer which contains Sr, La, Cr, Co, Ni, and Fe. The contact between layers could act as a physical barrier for element migration and thus can suppress degradation of the cathode for these systems. The area specific resistance slope depends on the interactions between the contact material and/or cathode and the interconnect. Co‐containing spinels formed during ASR test can be responsible of the resistance decrease of the system, related to the low degradation of the cell.Keywords
This publication has 21 references indexed in Scilit:
- Selection of cathode contact materials for solid oxide fuel cellsJournal of Power Sources, 2011
- Glass-containing composite cathode contact materials for solid oxide fuel cellsJournal of Power Sources, 2011
- Effect of Contact between Electrode and Interconnect on Performance of SOFC StacksFuel Cells, 2011
- Effect of the A Cation Size Disorder on the Properties of an Iron Perovskite Series for Their Use as Cathodes for SOFCsFuel Cells, 2010
- Cathode materials for solid oxide fuel cells: a reviewJournal of Solid State Electrochemistry, 2009
- Comparative study of perovskites as cathode contact materials between an La0.8Sr0.2FeO3 cathode and a Crofer22APU interconnect in solid oxide fuel cellsJournal of Power Sources, 2009
- Low-temperature sintering of lanthanum strontium manganite-based contact pastes for SOFCsJournal of Power Sources, 2008
- Electrical contacts between cathodes and metallic interconnects in solid oxide fuel cellsJournal of Power Sources, 2006
- Effect of contact between electrode and current collector on the performance of solid oxide fuel cellsSolid State Ionics, 2003
- Resistance Measurement in Solid Oxide Fuel CellsJournal of the Electrochemical Society, 2001