Large‐Scale X‐Ray Microtomography Analysis of Fiber Orientation in Weld Line of Short Glass Fiber Reinforced Thermoplastic and Related Elasticity Behavior
- 17 June 2016
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 301 (8) , 907-921
Abstract
Large‐scale X‐ray microcomputed tomography (μ‐CT) is used to investigate microstructural features of weld lines in a short glass fiber reinforced polymer. The main originality of this work is related to the evaluation of local structural and mechanical characteristics in zones of unmastered heterogeneities. Complete and incomplete injection molded plates are considered to investigate weld lines with and without process‐induced porosity. Using a helical scanning trajectory, the full 3D microstructure is obtained at centimetric scale to cover a large zone including first contact between colliding fronts at a voxel size of 3 μm. Microstructure analyses show that weld line area is ill‐ordered at the fiber and structure length scales. Near the first contact point, fiber orientations show the signature of vortexes, which mark the presence of repulsive forces. The presence of micrometric porosity is only confirmed in incomplete plates. μ‐CT images are used as inputs to create a full‐scale finite element model for assessing strain localization. Predicted principal strains are compared to digital image correlation measurements performed during uniaxial tensile tests. Full‐scale modeling combined to 3D high‐resolution imaging proves high potential to correlate local fiber heterogeneities with strain localization effects. imageKeywords
This publication has 46 references indexed in Scilit:
- Dimensional Quantification of Embedded Voids or Objects in Three Dimensions Using X-Ray TomographyMicroscopy and Microanalysis, 2012
- Generation of Anisotropic Cellular Solid Model and Related Elasticity Parameters: Finite Element SimulationJournal of Cellular Plastics, 2009
- Local anisotropy analysis of injection moulded fibre reinforced polymer compositesComposites Science and Technology, 2008
- Effects of Manufacturing-Induced Voids on Local Failure in Polymer-Based CompositesJournal of Engineering Materials and Technology, 2008
- Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural propertiesExpress Polymer Letters, 2007
- Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile couponsComposites Science and Technology, 2006
- Injection moulding of long glass fiber reinforced polyamide 66: Processing conditions/microstructure/flexural properties relationshipAdvances in Polymer Technology, 2005
- Computer Evaluation of Weld Lines in Injection-molded PartsJournal of Reinforced Plastics and Composites, 2005
- Weldlines in injection‐molded parts: A reviewAdvances in Polymer Technology, 1995
- A variational approach to the theory of the elastic behaviour of multiphase materialsJournal of the Mechanics and Physics of Solids, 1963