Effect of friction stir processing on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy
Author:
- 1 July 2008
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 222 (7) , 1117-1123
Abstract
The aim of this paper is to study the effect of friction stir processing (FSP) on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy. Also, the microstructural and mechanical characteristics were examined. Different samples were structured by employing a constant feed rate (ν) of 120 mm/min and different rotating speeds (ω) of 250, 315, 400, 500, 630, and 800 r/min. The results showed that FSP significantly refines the microstructure of the AA6063-T6 Al alloy. Increasing the rotational speed increases the grain size in the centres of stirred zones (SZ). The FSP significantly increases the electrical conductivity of the alloy. The highest electrical conductivities were observed at the centres of the SZ for the alloys processed with varying rotational speeds between 315 and 500 r/min. Increasing the rotational speed above this range tends to reduce the electrical conductivity, but it is still higher than the base material. In contrast, the corrosion resistance was found to decrease due to FSP of the AA6063-T6 aluminium alloy. It has been found that, increasing the rotational speed decreases the corrosion resistance of the SZ in 1 M HCl solution.Keywords
This publication has 12 references indexed in Scilit:
- The influence of the ratio of “rotational speed/traverse speed” (ω/v) on mechanical properties of AZ31 friction stir weldsInternational Journal of Machine Tools and Manufacture, 2006
- Effect of friction stir processing on the fatigue properties of a Zr-modified 2014 aluminium alloyMaterials Characterization, 2006
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Effect of friction stir processing on fatigue behavior of A356 alloyScripta Materialia, 2004
- Superplasticity in cast A356 induced via friction stir processingScripta Materialia, 2004
- FIB-assisted TEM study of an oxide array in the root of a friction stir welded aluminium alloyScripta Materialia, 2004
- Fine-grain evolution in friction-stir processed 7050 aluminumScripta Materialia, 2003
- Laser beam welding and friction stir welding of 6013-T6 aluminium alloy sheetMaterialwissenschaft und Werkstofftechnik, 2000
- Microstructural evolution of 6063 aluminum during friction-stir weldingMetallurgical and Materials Transactions A, 1999
- Microstructural aspects of the friction-stir welding of 6061-T6 aluminumScripta Materialia, 1997