Impact, Thermal, and Morphological Properties of Poly(Lactic Acid)/Poly(Methyl Methacrylate)/Halloysite Nanotube Nanocomposites
Authors:
- 1 March 2016
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 55 (14) , 1474-1480
Abstract
Poly(lactic acid)/poly(methyl methacrylate) blends containing halloysite nanotube (2 and 5 phr) and epoxidized natural rubber (5–15 phr) were prepared by melt mixing. The impact strength of poly(lactic acid)/poly(methyl methacrylate) blend was slightly improved by the addition of halloysite nanotube. Adding epoxidized natural rubber further increased the impact strength of poly(lactic acid)/poly(methyl methacrylate)/halloysite nanotube nanocomposite. Single Tg of poly(lactic acid)/poly(methyl methacrylate) is observed and this indicates that poly(lactic acid)/poly(methyl methacrylate) blend is miscible. The addition of halloysite nanotube into poly(lactic acid)/poly(methyl methacrylate) slightly increased the Tg of the blends. The epoxidized natural rubber could encapsulate some of the halloysite nanotube and prevent the halloysite nanotube from breaking into shorter length tube during the melt shearing process. GRAPHICAL ABSTRACTKeywords
Funding Information
- Universiti Sains Malaysia (Research University Grant (grant number: 814199))
This publication has 25 references indexed in Scilit:
- Mechanical and Thermal Properties Enhancement of Poly(Lactic Acid)/Halloysite Nanocomposites by Maleic-Anhydride Functionalized RubberJournal of Macromolecular Science, Part B, 2014
- Interactions, structure and properties in poly(lactic acid)/thermoplastic polymer blendsExpress Polymer Letters, 2014
- Polylactide (PLA)-based nanocompositesProgress in Polymer Science, 2013
- Nanocomposites of halloysite and polylactideApplied Clay Science, 2013
- The Effect of Rubber on Morphology, Thermal Properties and Mechanical Properties of PLA/NR and PLA/ENR BlendsEnergy Procedia, 2013
- Structure and properties of polylactide/natural rubber blendsMaterials Chemistry and Physics, 2011
- Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusionComposites Science and Technology, 2010
- Newly emerging applications of halloysite nanotubes: a reviewPolymer International, 2010
- Synthesis of Poly(Lactic Acid): A ReviewJournal of Macromolecular Science, Part C: Polymer Reviews, 2005
- Direct synthesis of poly(D,L‐lactic acid) by melt polycondensation and its application in drug deliveryJournal of Applied Polymer Science, 2003