Effect of Elevated Temperatures on Compressive Strength, Ultrasonic Pulse Velocity, and Transfer Properties of Metakaolin-Based Geopolymer Mortars
Open Access
Abstract
This study aims to investigate the impact of moderate and elevated temperatures on compressive strength, mass loss, ultrasonic pulse velocity (UPV), and gas permeability of mortars made using metakaolin (MK) or Ordinary Portland cement (OPC). The geopolymer mortar comprises MK, activated by a solution of sodium hydroxide (SH) and sodium silicate (SS) with a weight ratio of SS/SH equal to 2.5. For most of the tests, the MK and OPC mortar specimens were cured for 7 and 28 days before exposure to elevated temperatures, ranging from 100 °C to 900 °C in increments of 100 °C. In the permeability tests, conducted at temperatures ranging from 100 °C to 300 °C in 50 °C increments, the results revealed significant findings. When exposed to 200 °C, MK geopolymer mortar demonstrated an increase in compressive strength by 83% and 37% for specimens initially cured for 7 and 28 days, respectively. A strong polynomial correlation between UPV and compressive strength in MK mortar was observed. Prior to heat exposure, the permeability of MK mortar was found to be four times lower than that of OPC mortar, and this difference persisted even after exposure to 250 °C. However, at 300 °C, the intrinsic permeability of MK mortar was measured at 0.96 mD, while OPC mortar exhibited 0.44 mD.Keywords
This publication has 43 references indexed in Scilit:
- Mechanical properties and permeability of red mud-blast furnace slag-based geopolymer concreteSN Applied Sciences, 2021
- Spalling behavior of metakaolin-fly ash based geopolymer concrete under elevated temperature exposureCement and Concrete Composites, 2020
- New continuous strain‐based description of concrete's damage‐permeability couplingInternational Journal for Numerical and Analytical Methods in Geomechanics, 2018
- An original semi‐discrete approach to assess gas conductivity of concrete structuresInternational Journal for Numerical and Analytical Methods in Geomechanics, 2016
- Transport properties of high-volume fly ash concrete: Capillary water sorption, water sorption under vacuum and gas permeabilityCement and Concrete Composites, 2010
- Crack effects on gas and water permeability of concretesCement and Concrete Research, 2009
- Effects and interactions of temperature and stress-level related damage on permeability of concreteCement and Concrete Research, 2007
- Experimental study on a mortar. Temperature effects on porosity and permeability. Residual properties or direct measurements under temperatureCement and Concrete Research, 2005
- Intrinsic Permeability Evolution in High Temperature Concrete: An Experimental and Numerical AnalysisTransport in Porous Media, 2005
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991