Feasibility of segmented concrete in wind turbine tower: Numerical studies on its mechanical performance
Authors:
- 3 September 2020
- journal article
- research article
- Published by SAGE Publications in International Journal of Damage Mechanics
- Vol. 30 (4) , 518-536
Abstract
Segmented concrete slices have been widely used in the construction of wind turbine tower due to easy transportation and cost savings. Factors such as the size and form of the concrete slice and the connector may affect the stiffness and reliability of the structure. The objective of this study is to investigate the influence of the above factors on mechanical performance of a wind turbine tower. A finite element model of 40 m segmented concrete tower was developed for the modal analysis, and a local refinement model was established for the static analysis. Results show that the slice form and connectors have impact on the rigidity of the tower structure. Dividing the tower into two pieces per layer, increasing the height of the tower segment, using the grout connection of the longitudinal and staggering longitudinal seams can increase the stiffness of segmented concrete tower. In addition, this study analyzes the role of rubber pads in improving the mechanical performance of the tower, results show that the peak stress at the joints can be reduced by setting rubber pads with low elastic modulus at the longitudinal seams.Keywords
Funding Information
- Chinese Postdoctoral Science Foundation (2018M631166 and 2019T120914)
- National Natural Science Foundation of China (51909205)
This publication has 33 references indexed in Scilit:
- Connections in towers for wind converters, Part II: The friction connection behaviourJournal of Constructional Steel Research, 2015
- Ensemble neural networks for structural damage identification using modal dataInternational Journal of Damage Mechanics, 2015
- Anforderungen an die mechanische Fügetechnik für Türme von WEA in Stahlbauweise für große NabenhöhenStahlbau, 2015
- Design of Assembled Post-Tensioned Prestressed Reactive Powder Concrete Wind Turbine TowerAdvanced Materials Research, 2014
- Optimization design of prestressed concrete wind-turbine towerScience China Technological Sciences, 2014
- Fragility analysis of steel and concrete wind turbine towersEngineering Structures, 2012
- Refined Delamination Factor Failure Characterization of Composite Wind Turbine BladeInternational Journal of Damage Mechanics, 2011
- Approximate Analytical Method for Damage Detection in BeamInternational Journal of Damage Mechanics, 2011
- A Method of Estimating Wind Turbine Blade Fatigue Life and Damage using Continuum Damage MechanicsInternational Journal of Damage Mechanics, 2011
- The wind energy (r)evolution: A short review of a long historyRenewable Energy, 2011