Experimental Investigation of High-Viscosity Conductive Pastes and the Optimization of 3D Printing Parameters
Open Access
- 13 February 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (4) , 2389
Abstract
Traditional contact printing technology is primarily controlled by the shape of the mask to form the size, while for the more popular non-contact printing technologies, in recent years, adjusting the print parameters has become a direct way to control the result of the printing. High-viscosity conductive pastes are generally processed by screen printing, but this method has limited accuracy and wastes material. Direct-write printing is a more material-efficient method, but the printing of high-viscosity pastes has extrusion difficulties, which affects the printed line width. In this paper, we addressed these problems by studying the method of printing high-viscosity conductive paste with a self-made glass nozzle. Then, by parameter optimization, we achieved the minimum line width printing. The results showed that the substrate moving speed, the print height, and the feed pressure were the key factors affecting the line width and stability. The combination of the printing parameters of 0.6 MPa feed pressure, 200 mm/s substrate moving speed, and 150 μm print height can achieve a line width of approximately 30 μm. In addition, a mathematical model of the line width and parameters was established, and the prediction accuracy was within 5%. The results and the prediction model of the parameters provide an important reference for the printing of high-viscosity pastes, which have immense potential applications in electronics manufacturing and bioprinting.Keywords
Funding Information
- Guangxi Bagui Scholars Project (No. 2019A02)
This publication has 30 references indexed in Scilit:
- High Speed Dispensing with Novel 6” Print HeadEnergy Procedia, 2016
- Progress in fine-line metallization by co-extrusion printing on cast monosilicon PERC solar cellsSolar Energy Materials and Solar Cells, 2015
- Fine line metallization by coextrusion technology for next generation solar cellsSolar Energy Materials and Solar Cells, 2014
- Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticalsChemical Society Reviews, 2014
- Solder Paste Scooping Detection by Multilevel Visual Inspection of Printed Circuit BoardsIEEE Transactions on Industrial Electronics, 2012
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and ResolutionAnnual Review of Materials Research, 2010
- The rheology of suspensions of solid particlesProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2009
- Influence of Fluid Physical Properties on Ink-Jet PrintabilityLangmuir, 2009
- Metal aerosol jet printing for solar cell metallizationProgress in Photovoltaics: Research and Applications, 2007
- Polymer Rheology1978