Optimization of sample size and location for evaluating the hydraulic performance of microirrigation subunits using simulation and genetic algorithms
- 23 February 2024
- journal article
- research article
- Published by Wiley in Irrigation and Drainage
- Vol. 73 (4) , 1262-1278
Abstract
Rapid and accurate field evaluation of hydraulic performance is critical for the operation of a microirrigation system. However, the optimal sample size and the specific locations of the emitters selected in one subunit for field tests have not been determined. A model (Hydraulic Analysis of Pressurized Irrigation System,HAPIS) was constructed for hydraulic analysis of a pressurized irrigation system by coupling MATLAB and EPANET. The random sampling method (RSM) and uniform sampling method (USM) were optimized for emitters selected through simulation, aiming to achieve higher estimation accuracies of the mean emitter discharge rate of the subunit ( and the Christiansen uniformity coefficient (CU) while minimizing the number of emitters tested. In addition, a linear sampling method at predetermined emitter locations (LSMPE) was developed to simplify the evaluation process using a genetic algorithm (GA). The results indicate that the appropriate sample size range for RSM was 20–40, in which the maximum percentage difference between and CU was maintained at ±10%. For the USM, a sample size of approximately 18 can provide relatively accurate estimations of and CU, while it is recommended that the sampled emitters be distributed over three to five laterals. The optimal sample size of LSMPE could be decreased to approximately 10, and the selected emitters were arranged along the sampling line. The absolute relative estimation error of and CU could be maintained at <1%.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFD1900404)
- National Natural Science Foundation of China (51790531, 52279053)
This publication has 30 references indexed in Scilit:
- Effect of type of emitter self-cleaning mechanism and its structure on the performance of drip irrigation system using effluent of rainbow trout fishIrrigation Science, 2022
- Field evaluation of fertigation performance for a drip irrigation system with different lateral layouts under low operation pressuresIrrigation Science, 2021
- Optimization of soil moisture sensor placement for a PV-powered drip irrigation system using a genetic algorithm and artificial neural networkElectrical Engineering, 2016
- Design of Sprinkler Irrigation Subunit of Minimum Cost with Proper Operation. Application at Corn Crop in SpainWater Resources Management, 2014
- Making the user visible: analysing irrigation practices and farmers’ logic to explain actual drip irrigation performanceIrrigation Science, 2014
- Critical points: interactions between on-farm irrigation systems and water distribution networkIrrigation Science, 2014
- Design of microirrigation subunit of minimum cost with proper operationIrrigation Science, 2013
- Analysis, assessment, and improvement of fertilizer distribution in pressure irrigation systemsIrrigation Science, 2010
- Gravity-fed drip irrigation design procedure for a single-manifold subunitIrrigation Science, 2009
- Rapid field evaluation of drip and microspray distribution uniformityIrrigation and Drainage Systems, 2004