A Numerical Study of the U-Turn Bend in Return Channel Systems for Multistage Centrifugal Compressors
Authors:
- 1 August 2005
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 219 (8) , 749-756
Abstract
A qualitative numerical study of the flow in the U-turn bend of return channel systems for multistage centrifugal compressors is presented. Calculations have been carried out using the flow analysis program FLUENT. The flow in the U-turn bend is highly three-dimensional and complex. The main cause for this is the circumferential variation of the velocity profile at the inlet of the bend. The circumferential variation of the velocity profile is an unavoidable result from the wake/jet flow at the exit of the impeller. In this article, first the effect of the wake/jet flow coming into the U-turn bend is studied. It is shown that the wake/jet flow develops to form the secondary flow in the U-turn bend. The secondary flow, with the high streamline curvature of the flow in the bend, makes the flow inside the bend highly complex. This complex flow is hard to predict with conventional turbulence models that have been developed on the basis of near homogeneity of flows. Comparing the present result with a study that successfully predicted the loss and flow behaviour in the bend, a discussion is presented on the turbulence and the turbulence models. Also, the loss mechanisms in the U-turn bend are discussed in detail.Keywords
This publication has 6 references indexed in Scilit:
- The Use of Artificial Neural Networks for Performance Prediction of Return Channels for Industrial Centrifugal Compressors2002
- Numerical Simulation of the Flow Through the Return Channel of Multi-Stage Centrifugal Compressors1998
- Detailed flow measurements within the impeller and the vaneless diffuser of a centrifugal turbomachineExperimental Thermal and Fluid Science, 1998
- Aerodynamic Design and Analysis of Vaneless Diffusers and Return Channels1993
- Theoretical and Experimental Investigations About Vaneless Return Channels of Multi-Stage Radial Flow Turbomachines1982
- Three-Dimensional Boundary-Layer Computation on the Stationary End-Walls of Centrifugal TurbomachineryJournal of Fluids Engineering, 1976