Effect of Panel Construction on the Ballistic Performance of Multiply 3D through-the-Thickness Angle-Interlock fabrIc Reinforced Composites
Open Access
Abstract
This paper studied the ballistic performance of 3D woven angle-interlock fabric reinforced composites with different types of panel construction. Two types of composites P10B and P17C were designed to have the same areal density of around 12 kg/m2 although they both had different ply areal densities and consisted of different numbers of plies. Non-perforated ballistic impacts were conducted on the two types of panels under the same level of impact energy. Post-mortem examination on the non-perforated panels was conducted through the cross-sectional images, planar projected delamination and 3D damage volume extracted from the non-destructive tests. Three distinctive sections of damage were segmented from the non-perforated panels, each indicating different material failure modes upon impact. Under the same areal density, the coarser composite panel P10B with a larger ply areal density and fewer reinforcement plies would result in less damage. The damage volume of P10B is nearly one-third that of the P17C. The findings are instructive for the design of 3D woven fabric continuously reinforced composites with doubly-curved shapes.Keywords
Funding Information
- Beijing Institute of Fashion Technology (NHFZ20180007, 2017A-18)
- Beijing Key Laboratory of Clothing Materials R&D and Assessment (2017ZK-05)
- Beijing Great Wall Scholars Incubator Program (CTT&TCD20180321)
This publication has 20 references indexed in Scilit:
- Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven compositesComposites Part A: Applied Science and Manufacturing, 2015
- The surface modification of ballistic textiles using plasma-assisted chemical vapor deposition (PACVD)Textile Research Journal, 2014
- Numerical simulation of the ballistic protection performance of a laminated armor system with pre-existing debonding/delaminationComposites Part B: Engineering, 2014
- Plasma modification of Kevlar fabrics for ballistic applicationsTextile Research Journal, 2012
- An overview on fabrication of three-dimensional woven textile preforms for compositesTextile Research Journal, 2011
- The use of warp interlock fabric inside textile composite protection against ballistic impactTextile Research Journal, 2010
- Accuracy of Sediment Flux Computations in Tidally Driven SimulationsJournal of Waterway, Port, Coastal, and Ocean Engineering, 2007
- Performance of stitched/unstitched woven carbon/epoxy composites under high velocity impact loadingComposite Structures, 2004
- Mouldability of Angle-Interlock Woven Fabrics for Technical ApplicationsTextile Research Journal, 2002
- Effect of Stitching on the Mechanical and Impact Properties of Woven Laminate CompositeJournal of Composite Materials, 1994