Strain Accumulation and Microstructural Evolution During Friction Stir Welding of Pure Magnesium
Authors:
Open Access
- 16 November 2020
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 7
Abstract
In this study, the stain accumulation during friction stir welding of pure Mg was predicted and verified at different rotation speeds, together with the detailed microstructural evolution. The results indicate that the strain accumulation can be divided into three stages: 1) acceleration flow, 2) high velocity flow, and (III) decelerate and constant velocity flow. The rate of strain accumulation was relatively low at both stage I and stage III, while it became extremely high at stage III. The higher the speed of rotation, the severe plastic deformation more easily occurred within the material. The accumulated strain of pure Mg were determined to be approximately 12.8 and 14.5 at the rotation speed of 1,000 and 1,500 rpm, respectively. Relatively believable equations were established by calculation and derivation. In addition, the microstructural evolution shows that that the friction stir welding processed pure Mg first experienced significant grain refinement during plastic deformation but led to an obvious grain growth at the later stage due to the heat effect by high temperature field.Keywords
This publication has 34 references indexed in Scilit:
- Strain hardening and nanocrystallization behaviors in Hadfield steel subjected to surface severe plastic deformationMaterials Science and Engineering: A, 2018
- Numerical Modelling of Microstructure Evolution in Friction Stir Welding (FSW)Metals, 2018
- Microstructural modification of pure Mg for improving mechanical and biocorrosion propertiesJournal of the Mechanical Behavior of Biomedical Materials, 2016
- Effect of initial base metal temper on microstructure and mechanical properties of friction stir processed Al-7B04 alloyMaterials Science and Engineering: A, 2016
- Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloyMaterials Science and Engineering: A, 2016
- Thermo-mechanical and metallurgical aspects in friction stir processing of AZ31 Mg alloy—A numerical and experimental investigationJournal of Materials Processing Technology, 2013
- Improved mechanical property and internal friction of pure Mg processed by ECAPMaterials Science and Engineering: A, 2012
- Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir weldsMaterials Science and Engineering: A, 2012
- Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parametersActa Materialia, 2009
- Relationship between grain size and Zener–Holloman parameter during friction stir processing in AZ31 Mg alloysScripta Materialia, 2004