Polylactide, nanoclay, and core–shell rubber composites
- 23 August 2006
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 46 (10) , 1419-1427
Abstract
Three types of composites, namely, polylactide (PLA)/nanoclay, PLA/core–shell rubber, and PLA/nanoclay/core–shell rubber, were melt compounded via a corotating twin‐screw extruder. The effects of two types of organically modified montmorillonite nanoclays (i.e., Cloisite®30B and 20A), two types of core (polybutylacrylate)–shell (polymethylmethacrylate) rubbers (i.e., Paraloid EXL2330 and EXL2314), and the combination of nanoclay and rubber on the mechanical and thermal properties of the composites were investigated. According to X‐ray diffraction and transmission electron microscopy analyses, both types of PLA/5 wt% nanoclay composites had an intercalated morphology. In comparison with pure PLA, both types of PLA/5 wt% nanoclay composites had an increased modulus, similar impact strength, slightly reduced tensile strength, and significantly reduced strain at break. On the other hand, PLA/EXL2330 composites with a rubber loading level of 10 wt% or higher had a much higher impact strength and strain at break, but a lower modulus and strength when compared with pure PLA. The simultaneous addition of 5 wt% nanoclay (Cloisite®30B) and 20 wt% EXL2330 resulted in a PLA composite with a 134% increase in impact strength, a 6% increase in strain at break, a similar modulus, and a 28% reduction in tensile strength in comparison with pure PLA. POLYM. ENG. SCI. 46:1419–1427, 2006. © 2006 Society of Plastics EngineersKeywords
This publication has 29 references indexed in Scilit:
- Toughening of polylactide by melt blending with linear low‐density polyethyleneJournal of Applied Polymer Science, 2003
- Blends containing core–shell impact modifiers. Part 3 – Effects of temperature on tensile impact behaviourPlastics, Rubber and Composites: Macromolecular Engineering, 2001
- Global Status of the Production of Biobased Packaging MaterialsStarch - Stärke, 2001
- New toughening mechanisms in rubber modified polymersPlastics, Rubber and Composites: Macromolecular Engineering, 2001
- Small angle X-ray scattering investigation of deformation in PMMA toughened with core–shell particlesPlastics, Rubber and Composites: Macromolecular Engineering, 2001
- Plasticizing polylactide—the effect of different plasticizers on the mechanical propertiesPolymer Engineering & Science, 1999
- Polyurethane toughened polylactidePolymer Bulletin, 1998
- Large-scale production, properties and commercial applications of polylactic acid polymersPolymer Degradation and Stability, 1998
- Impact modification of lactic acid based poly(ester-urethanes) by blendingJournal of Applied Polymer Science, 1997
- Rubber toughening of poly(lactide) by blending and block copolymerizationPolymer Engineering & Science, 1994