Crocodile Skin‐Inspired Protective Composite Textiles with Pattern‐Controllable Soft‐Rigid Unified Structures
- 10 January 2023
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (12)
Abstract
Functional textiles with desirable protective properties (i.e., high cut‐, stab‐, and abrasion resistance) and wearability (i.e., excellent flexibility and permeability) remain unmet goals for personal protective equipment. Herein, inspired by crocodile skin, a unique and soft‐rigid unified structure (SRUS) is reported by integrating rigid protective blocks onto a soft textile substrate while obtaining a high cut‐, stab‐, and abrasion‐resistant composite textile that is flexible, waterproof, and breathable. Rigid blocks, consisting of epoxy resin reinforced by inorganic powders, strongly adhere to the soft textile surface with small intervals between each other via a pattern‐controllable integrated molding (PCIM) approach. Consequently, the SRUS design guarantees superior protective performance through rigid protective blocks and satisfactory flexibility and permeability via soft textiles and intervals. The SRUS textile achieves excellent cut‐resistance (58 N), the highest grades of stab‐ (38 N) and abrasion‐resistance (600 r mg−1), and good flexibility (65 mN cm) and permeability (60 mm s−1) values, indicating a distinct combination of desirable protective and wearable performance. The proposed SRUS protective textiles, incorporating the PCIM approach, offer a novel strategy for manufacturing functional soft composite textiles that combine high protective performance and good wearability, opening up a new avenue for the development of personal protective equipment.Keywords
Funding Information
- National Natural Science Foundation of China (52105153)
- Natural Science Foundation of Jiangsu Province (BK20221378)
This publication has 47 references indexed in Scilit:
- The influence of carbon nanotubes on quasi-static puncture resistance and yarn pull-out behavior of shear-thickening fluids (STFs) impregnated woven fabricsComposites Part A: Applied Science and Manufacturing, 2016
- Engineering enhanced cut and puncture resistance into the thermal micrometeoroid garment (TMG) using shear thickening fluid (STF) – Armor™ absorber layersComposites Science and Technology, 2016
- Modeling and optimization of dynamic puncture behaviors for flexible inter-/intra- reinforced compound fabricsFibers and Polymers, 2016
- Static and dynamic puncture failure behaviors of 3D needle-punched compound fabric based on Weibull distributionTextile Research Journal, 2014
- Structural design and mechanical behavior of alligator (Alligator mississippiensis) osteodermsActa Biomaterialia, 2013
- The peel ply surface treatment for adhesive bonding of composites: A reviewInternational Journal of Adhesion and Adhesives, 2013
- Composites Reinforced in Three Dimensions by Using Low Magnetic FieldsScience, 2012
- Stab and cut resistance of knitted structures: a comparative studyTextile Research Journal, 2010
- Mechanics and mechanism of cut resistance of protective materialsTheoretical and Applied Fracture Mechanics, 2009
- Puncture resistance of fibrous structuresInternational Journal of Impact Engineering, 2006