Overlapping-based optical freeform surface construction for extended lighting source
- 15 August 2013
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 21 (17) , 19750-19761
Abstract
The freeform optical system for an extended source was constructed by partially overlapping a few numbers of point-source freeform surfaces (PFSs) and extracting their contour. Each PFS redistributed the Lambertian emission of a point source into the prescribed light distribution or more frequently into a modified distribution. By adjusting the relative positions of the PFSs and the pattern of the modified light distribution, the optimized freeform surface could be obtained. As an example, an optical system with a height only four times the source radius is designed for achieving a uniform-illuminance distribution on the target. The optimized freeform surface was formed by two PFSs. The virtue-point-sources of the PFSs were located symmetrically on the extended source with a distance of a quarter of the source diameter from each other. Each PFS achieved an increasing-illuminance distribution. The illumination uniformity of this model can be improved by 55.4%, while the optical efficiency within the target area is maintained above 80%.Keywords
This publication has 15 references indexed in Scilit:
- Observations on the linear programming formulation of the single reflector design problem.Optics Express, 2012
- Reliability of point source approximations in compact LED lens designsOptics Express, 2011
- Design of compact and smooth free-form optical system with uniform illuminance for LED sourceOptics Express, 2010
- Discontinuous free-form lens design for prescribed irradianceApplied Optics, 2007
- Generalized functional method of nonimaging optical design2006
- Review of SMS design methods and real-world applications2004
- Simultaneous multiple surface design of compact air-gap collimators for light-emitting diodesOptical Engineering, 2004
- Simultaneous multiple surface optical design method in three dimensionsOptical Engineering, 2004
- Tailored freeform optical surfacesJournal of the Optical Society of America A, 2002
- Design of illumination lenses via extrinsic differential geometry1998