Development of a non-explosive release actuator using shape memory alloy wire
- 1 January 2013
- journal article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 84 (1) , 015005
Abstract
We have developed a newly designed non-explosive release actuator that can replace currently used release devices. The release mechanism is based on a separation mechanism, which relies on segmented nuts and a shape memory alloy (SMA) wire trigger. A quite fast and simple trigger operation is made possible through the use of SMA wire. This actuator is designed to allow a high preload with low levels of shock for the solar arrays of medium-size satellites. After actuation, the proposed device can be easily and instantly reset. Neither replacement, nor refurbishment of any components is necessary. According to the results of a performance test, the release time, preload capacity, and maximum shock level are 50 ms, 15 kN, and 350 G, respectively. In order to increase the reliability of the actuator, more than ten sets of performance tests are conducted. In addition, the proposed release actuator is tested under thermal vacuum and extreme vibration environments. No degradation or damage was observed during the two environment tests, and the release actuator was able to operate successfully. Considering the test results as a whole, we conclude that the proposed non-explosive release actuator can be applied reliably to intermediate-size satellites to replace existing release systems.Keywords
This publication has 6 references indexed in Scilit:
- Spacecraft solar array technology trendsIEEE Aerospace and Electronic Systems Magazine, 2011
- Shape memory alloy (SMA) based non-explosive separation actuator (NEA) with a redundant functionInternational Journal of Precision Engineering and Manufacturing, 2011
- Ultimate load and release time controllable non-explosive separation device using a shape memory alloy actuatorJournal of Mechanical Science and Technology, 2011
- Prediction of the Vibration Levels Generated by Pyrotechnic Shocks Using an Approach by Equivalent Mechanical ShockJournal of Vibration and Acoustics, 2008
- Shape memory alloys for microsystems: A review from a material research perspectiveMaterials Science and Engineering: A, 2008
- On-orbit experiments and applications of shape memory alloy mechanisms2000