Hybrid selective noncatalytic reduction (SNCR)/selective catalytic reduction (SCR) for NOx removal using low-temperature SCR with Mn-V2O5/TiO2 catalyst
Authors:
Open Access
- 3 January 2015
- journal article
- research article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 65 (4) , 485-491
Abstract
A hybrid selective noncatalytic reduction/selective catalytic reduction (SNCR/SCR) system that uses two types of technology, low-temperature SCR process and SNCR process, was designed to develop nitrogen oxide (NOx) reduction technology. SCR was conducted with space velocity (SV) = 2400 hr−1 and hybrid SNCR/SCR with SV = 6000 hr−1, since the study focused on reducing the amount of catalyst and both achieved 98% NOx reduction efficiency. Characteristics of NOx reduction by NH3 were studied for low-temperature SCR system at 150 °C using Mn-V2O5/TiO2 catalyst. Mn-added V2O5/TiO2 catalyst was produced, and selective catalyst reduction of NOx by NH3 was experimented. NOx reduction rate according to added Mn content in Mn-V2O5/TiO2 catalyst was studied with varying conditions of reaction temperature, normalized stoichiometric ratio (NSR), SV, and O2 concentration. In the catalyst experiment according to V2O5 concentration, 1 wt.% V2O5 catalyst showed the highest NOx reduction rate: 98% reduction at temperature window of 200~250 °C. As a promoter of the V2O5 catalyst, 5 wt.% Mn was added, and the catalyst showed 47~90% higher efficiency even with low temperatures, 100~200 °C. Mn-V2O5/TiO2 catalyst, prepared by adding 5 wt.% Mn in V2O5/TiO2 catalyst, showed increments of catalyst activation at 150 °C as well as NOx reduction. Mn-V2O5/TiO2 catalyst showed 8% higher rate for NOx reduction compared with V2O5/TiO2 catalyst in 150 °C SCR. Thus, (5 wt.%)Mn-(1 wt.%)V2O5/TiO2 catalyst was applied in SCR of hybrid SNCR/SCR system of low temperature at 150 °C. Low-temperature SCR hybrid SNCR/SCR (150 °C) system and hybrid SNCR/SCR (350 °C) showed 91~95% total reduction rate with conditions of SV = 2400~6000 hr−1 SCR and 850~1050 °C SNCR, NSR = 1.5~2.0, and 5% O2. Hybrid SNCR/SCR (150 °C) system proved to be more effective than the hybrid SNCR/SCR (350 °C) system at low temperature. Implications: NOx control is very important, since they are the part of greenhouse gases as well as the cause of acid rain and ozone hole. A technology, so-called hybrid SNCR/SCR process, was tested using Mn-V2O5/TiO2 monolithic catalyst for NOx reduction, and the method is promising. The results of this study would provide some ideas to parties such as policy makers, environmental engineers, and so on.Keywords
This publication has 19 references indexed in Scilit:
- Characterization of MoO3–V2O5/Al2O3 catalysts for selective catalytic reduction of NO by NH3Journal of Industrial and Engineering Chemistry, 2012
- Cr–MnO mixed-oxide catalysts for selective catalytic reduction of NO with NH3 at low temperatureJournal of Catalysis, 2010
- Effect of promoters including WO3 and BaO on the activity and durability of V2O5/sulfated TiO2 catalyst for NO reduction by NH3Applied Catalysis B: Environment and Energy, 2003
- The combustion of Orimulsion and its generation of air pollutantsProgress in Energy and Combustion Science, 2000
- Selective catalytic reduction of NO with ammonia over V2O5 doped TiO2 pillared clay catalystsApplied Catalysis B: Environment and Energy, 2000
- Characterization and Reactivity of V2O5–MoO3/TiO2 De-NOx SCR CatalystsJournal of Catalysis, 1999
- NOx Removal with Combined Selective Catalytic Reduction and Selective Noncatalytic Reduction: Pilot-Scale Test ResultsAir & Waste, 1994
- Role of WO3 in mixed V2O5-WO3/TiO2catalysts for selective catalytic reduction of nitric oxide with ammoniaApplied Catalysis A: General, 1992
- Mechanism and modeling of nitrogen chemistry in combustionProgress in Energy and Combustion Science, 1989
- PrefaceCatalysis Today, 1988