Silicon Composite Electrodes with Dynamic Ionic Bonding
- 12 May 2017
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 7 (17)
Abstract
Silicon (Si) composite electrodes are developed with increased cycle lifetimes and reliability through dynamic ionic bonding between active Si nanoparticles and a polymer binder. Amine groups are covalently attached to Si nanoparticles via surface functionalization. Si composite electrodes are fabricated by combining the Si nanoparticles with a poly(acrylic acid) (PAA) binder. The formation of ionic bonds between amine groups on Si particles and carboxylic acid groups on the PAA binder is characterized by X‐ray photoelectron spectroscopy and Raman spectroscopy. Si composite anodes with ionic bonding demonstrate long term cycling stability with capacity retention of 80% at 400 cycles at a current density of 2.1 A g−1 and good rate capability. The dynamic ionic bonds effectively mitigate the deterioration of electrical interfaces in the composite anodes as suggested by stable impedance over 300 cycles.Keywords
Funding Information
- U.S. Department of Energy
- Office of Science
- Basic Energy Sciences
This publication has 36 references indexed in Scilit:
- Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matterNanoscale, 2015
- Review—Nano-Silicon/Carbon Composite Anode Materials Towards Practical Application for Next Generation Li-Ion BatteriesJournal of the Electrochemical Society, 2015
- Mesoporous silicon sponge as an anti-pulverization structure for high-performance lithium-ion battery anodesNature Communications, 2014
- Scalable Synthesis of Interconnected Porous Silicon/Carbon Composites by the Rochow Reaction as High‐Performance Anodes of Lithium Ion BatteriesAngewandte Chemie, 2014
- Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A ReviewAdvanced Energy Materials, 2013
- Designing nanostructured Si anodes for high energy lithium ion batteriesNano Today, 2012
- A Highly Cross‐Linked Polymeric Binder for High‐Performance Silicon Negative Electrodes in Lithium Ion BatteriesAngewandte Chemie International Edition, 2012
- Building better batteriesNature, 2008
- Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cellsJournal of Power Sources, 2007
- Issues and challenges facing rechargeable lithium batteriesNature, 2001