Evaluating the Top Electrode Material for Achieving an Equivalent Oxide Thickness Smaller than 0.4 nm from an Al-Doped TiO2 Film
- 17 November 2014
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (23) , 21632-21637
Abstract
The effects of Pt and RuO2 top electrodes on the electrical properties of capacitors with Al-doped TiO2 (ATO) films grown on the RuO2 bottom electrode by an atomic layer deposition method were examined. The rutile phase ATO films with high bulk dielectric constant (>80) were well-grown because of the local epitaxial relationship with the rutile structured RuO2 bottom electrode. However, the interface between top electrode and ATO was damaged during the sputtering process of the top electrode, resulting in the decrease in the dielectric constant. Postmetallization annealing at 400 °C was performed to mitigate the sputtering damage. During the postmetallization annealing, the ATO layer near the RuO2 top electrode/ATO interface was well-crystallized because of the structural compatibility between RuO2 and rutile ATO, while the ATO layer near the Pt top electrode/ATO interface still exhibited an amorphous-like structure. Despite the same thickness of the ATO films, therefore, the capacitors with RuO2 top electrodes showed higher capacitance compared to the capacitors with Pt top electrodes. Eventually, an extremely low equivalent oxide thickness of 0.37 nm with low enough leakage current density (–7 A/cm2 at 0.8 V) and physical thickness of 8.7 nm for the next-generation dynamic random access memory was achieved from ATO films with RuO2 top electrodes.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (10047231)
- Korea Semiconductor Research Consortium
This publication has 25 references indexed in Scilit:
- Impact of plasma treatment on electrical properties of TiO2/RuO2based DRAM capacitorJournal of Physics D: Applied Physics, 2013
- Atomic Layer Deposition of SrTiO3 Films with Cyclopentadienyl-Based Precursors for Metal–Insulator–Metal CapacitorsChemistry of Materials, 2013
- Reliability of $\hbox{SrRuO}_{3}\hbox{/SrTiO}_{3}\hbox{/SrRuO}_{3}$ Stacks for DRAM ApplicationsIEEE Electron Device Letters, 2012
- Electrical properties of TiO2-based MIM capacitors deposited by TiCl4 and TTIP based atomic layer deposition processesMicroelectronic Engineering, 2011
- SrTiO 3 thin film capacitors on silicon substrates with insignificant interfacial passive layersApplied Physics Letters, 2010
- Capacitors with an Equivalent Oxide Thickness of <0.5 nm for Nanoscale Electronic Semiconductor MemoryAdvanced Functional Materials, 2010
- Al‐Doped TiO2 Films with Ultralow Leakage Currents for Next Generation DRAM CapacitorsAdvanced Materials, 2008
- Growth of High-Dielectric-Constant TiO[sub 2] Films in Capacitors with RuO[sub 2] ElectrodesElectrochemical and Solid-State Letters, 2008
- Origin of the dielectric dead layer in nanoscale capacitorsNature, 2006
- Band offsets of wide-band-gap oxides and implications for future electronic devicesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2000