Vibration suppression and coupled interaction study in milling of thin wall casings in the presence of tuned mass dampers
- 26 November 2013
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 228 (6) , 826-836
Abstract
Damping of machining vibrations in thin-wall structures is an important area of research due to the ever-increasing use of lightweight structures such as jet engine casings. Published literature has focussed on passive/active damping solutions for open geometry structure (e.g. cantilever thin wall), whereas more challenging situations such as closed geometry structures (e.g. thin wall ring-type casings) were not taken into consideration. In this study, a passive damping solution in the form of tuned viscoelastic dampers is studied to minimise the vibration of thin wall casings while focussing on the change in coupled interaction between tool and workpiece due to added tuned dampers. Finite element simulation was carried out to evaluate the effectiveness of tuned dampers in single impact excitation, and this was further validated experimentally through modal impact testing. A reduction in root mean square value, with tuned dampers, of about 2.5 and 4 times is noted at higher and lower depths of cut, respectively, indicating a moderate dependency on depth of cut. A change in coupled interaction of workpiece with tool’s torsional mode (in undamped state) to that of tool’s bending mode (with tuned dampers) was also noted. Variation in machined wall thickness of the order of 6 µm is noted due to the change in coupled interaction from torsional mode to bending mode of tool.Keywords
This publication has 13 references indexed in Scilit:
- Optimization of multiple tuned mass dampers to suppress machine tool chatterInternational Journal of Machine Tools and Manufacture, 2010
- Tuneable vibration absorber design to suppress vibrations: An application in boring manufacturing processJournal of Sound and Vibration, 2008
- Design and implementation of tuned viscoelastic dampers for vibration control in millingInternational Journal of Machine Tools and Manufacture, 2008
- Vibration absorbers for chatter suppression: A new analytical tuning methodologyJournal of Sound and Vibration, 2007
- Active vibration control in palletised workholding system for millingInternational Journal of Machine Tools and Manufacture, 2006
- Stability limits of milling considering the flexibility of the workpiece and the machineInternational Journal of Machine Tools and Manufacture, 2005
- Milling workpiece chatter avoidance using piezoelectric active damping: a feasibility studySmart Materials and Structures, 2005
- Dynamic Behavior of a Thin-Walled Cylindrical Workpiece During the Turning Process, Part 1: Cutting Process SimulationJournal of Manufacturing Science and Engineering, 2002
- Stability analysis of chatter vibration for a thin-wall cylindrical workpieceInternational Journal of Machine Tools and Manufacture, 1995
- A study on the chatter characteristics of the thin wall cylindrical workpieceInternational Journal of Machine Tools and Manufacture, 1994