Corrosion protection of new composite polymer coating for carbon steel in sulfuric acid medium by electrochemical methods
- 23 May 2018
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 32 (21) , 2364-2380
Abstract
In this paper, electropolymerization technique has been used for the obtained of new composite: polypyrrole – dioctyl sulfosuccinate sodium/poly N-ethylaniline (PPY-AOT/PNEA) coatings over carbon steel of type OLC 45 electrode for anticorrosion protection. The PPY-AOT/PNEA coatings were successfully synthesized onto OLC 45 electrode by galvanostatic deposition from aqueous solutions 0.1 M NEA, 0.1 M PY, 0.01 M AOT and 0.3 M H2C2O4 solution at different current densities (5, 3 and 1 mA/cm2) in different molar ratio. The anionic surfactant (AOT) as a dopant ion used during electropolymerization can have a significant result on the anticorrosion protection of the composite film by hindering the penetration of aggressive ions. The polymeric composite coatings have been analyzed by cyclic voltammetry (CV), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) methods. The corrosion resistance of PPY-AOT/PNEA coated carbon steel has been examined by potentiodynamic polarization techniques and electrochemical impedance spectroscopy (EIS) methods in 0.5 M H2SO4 solutions. The data of the corrosion samples demonstrated that PPY-AOT/PNEA coatings assure a great anticorrosion protection of OLC 45 electrode in corrosive media. The corrosion rate of PPY-AOT/PNEA coated OLC 45 has been indicated to be ~9 times lower than of uncoated electrode. The corrosion protection effectiveness of the composite coating is more than 89%. The best efficiency is accomplished of PPY-AOT/PNEA obtained by electrodeposition at 5 mA/cm2 current densities applied in molar ratio 5:1.Keywords
Funding Information
- EU (ERDF) &Romanian Government infrastructure POS-CCE O 2.2.1. (Grant Number: 169 INFRANANOCHEM)
This publication has 35 references indexed in Scilit:
- Electrochemical synthesis of bilayer coatings of poly(N-methylaniline) and polypyrrole on mild steel and their corrosion protection performancesElectrochimica Acta, 2011
- Characterization of electrodeposited polymeric and composite modified electrodes on cobalt based alloyMaterials Chemistry and Physics, 2009
- Monolayer and bilayer conducting polymer coatings for corrosion protection of steel in 1M H2SO4 solutionProgress in Organic Coatings, 2009
- Electrosynthesized Doped Polypyrrole Films on Pure Zinc ElectrodeMolecular Crystals and Liquid Crystals, 2008
- Electrodeposition of homogeneous and adherent polypyrrole on copper for corrosion protectionElectrochimica Acta, 2007
- Potentiodynamic and potentiostatic deposition of polyaniline on stainless steel: Electrochemical and structural studies for a potential application to corrosion controlElectrochimica Acta, 2007
- The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steelMaterials Science and Engineering: A, 2002
- Electrodeposition mechanism of polypyrrole coatings on steel substrates from aqueous oxalate solutionsElectrochimica Acta, 2000
- Electrosynthesis of adherent polyaniline films on iron and mild steel in aqueous oxalic acid mediumSynthetic Metals, 1998
- Investigation of corrosion protection of steel by polyaniline filmsElectrochimica Acta, 1998