Optimal seismic design of steel frame buildings based on life cycle cost considerations
Authors:
- 9 May 2003
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 32 (9) , 1313-1332
Abstract
A multi‐objective optimization procedure is presented for designing steel moment resisting frame buildings within a performance‐based seismic design framework. Life cycle costs are considered by treating the initial material costs and lifetime seismic damage costs as two separate objectives. Practical design/construction complexity, important but difficult to be included in initial cost analysis, is taken into due account by a proposed diversity index as another objective. Structural members are selected from a database of commercially available wide flange steel sections. Current seismic design criteria (AISC‐LRFD seismic provisions and 1997 NEHRP provisions) are used to check the validity of any design alternative. Seismic performance, in terms of the maximum inter‐storey drift ratio, of a code‐verified design is evaluated using an equivalent single‐degree‐of‐freedom system obtained through a static pushover analysis of the original multi‐degree‐of‐freedom frame building. A simple genetic algorithm code is used to find a Pareto optimal design set. A numerical example of designing a five‐storey perimeter steel frame building is provided using the proposed procedure. It is found that a wide range of valid design alternatives exists, from which a decision maker selects the one that balances different objectives in the most preferred way. Copyright © 2003 John Wiley & Sons, Ltd.Keywords
This publication has 13 references indexed in Scilit:
- Modeling of steel moment frames for seismic loadsJournal of Constructional Steel Research, 2002
- A modal pushover analysis procedure for estimating seismic demands for buildingsEarthquake Engineering & Structural Dynamics, 2001
- Cost optimal design of R/C buildingsReliability Engineering & System Safety, 2001
- Minimum Building Life-Cycle Cost Design Criteria. II: ApplicationsJournal of Structural Engineering, 2001
- Evaluation of Pre-Northridge Low-Rise Steel Buildings. II: ReliabilityJournal of Structural Engineering, 2000
- Pros and cons of a pushover analysis of seismic performance evaluationEngineering Structures, 1998
- Multiobjective Optimization Design with Pareto Genetic AlgorithmJournal of Structural Engineering, 1997
- DUAL-LEVEL SEISMIC DESIGN: A RELIABILITY-BASED METHODOLOGYEarthquake Engineering & Structural Dynamics, 1996
- 6. Evaluation of Strength Reduction Factors for Earthquake‐Resistant DesignEarthquake Spectra, 1994
- Reliability-Based Tail Estimation1994