Hot Deformation Behavior of P550 Steels for Nonmagnetic Drilling Collars
Authors:
- 20 May 2020
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 91 (8)
Abstract
The hot deformation behavior of P550 steels containing different nitrogen contents (0.63 and 0.86 wt% N) is investigated by isothermal compression tests at 900–1200 °C and 0.05–5 s−1. Electron backscattered diffraction (EBSD) is performed to reveal the effects of nitrogen content, deformation temperature, and strain rate on dynamic recrystallization (DRX) behavior of P550 steels. The results indicate that high nitrogen significantly increases the flow stress and apparent activation energy of P550 steels; it also favors the nucleation of DRX by refining the initial grain size. As the deformation temperature is raised, both the fraction and average misorientation angle of DRX grains increase; however, these values first decrease and then increase with increasing the strain rate. The microstructural changes demonstrate that discontinuous DRX (DDRX) plays a dominant role in the nucleation of DRX for the studied steels, whereas continuous DRX (CDRX) is only a coordinated one.Keywords
Funding Information
- National Natural Science Foundation of China (U1960203, 51774074)
This publication has 54 references indexed in Scilit:
- An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformationMaterials Science and Engineering: A, 2013
- Influence of grain boundary carbides on mechanical properties of high nitrogen austenitic stainless steelMaterials & Design (1980-2015), 2012
- Quantitative analysis of grain boundaries in carbon- and nitrogen-added ferritic steels by atom probe tomographyScripta Materialia, 2012
- Constitutive relationships for hot deformation of austeniteActa Materialia, 2011
- Failure Analysis of Drill Collar Box FractureAdvanced Materials Research, 2011
- Flow behavior and microstructures of superalloy 718 during high temperature deformationMaterials Science and Engineering: A, 2008
- High Nitrogen Alloyed Steels for Nonmagnetic Drill Collars. Standard Steel Grades and Latest DevelopmentsMaterials and Manufacturing Processes, 2004
- Strain-rate effect on dynamic recrystallization at grain boundary in Cu alloy bicrystalScripta Materialia, 2003
- Effect of nitrogen and carbon on the early stage of austenite recrystallisation in iron–niobium alloysMaterials Science and Engineering: A, 2002
- Hot working characteristics of steels in austenitic stateJournal of Materials Processing Technology, 1995