A measurement point planning method based on lidar automatic measurement technology
- 1 January 2023
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (1) , 015104
Abstract
The automated measurement mode in the lidar measurement system (LMS) has advantages unmatched by other measurement equipment in measuring the surface of large components. Before starting the automatic measurement mode, it is necessary to plan the measurement guide points for the measurement area. The rationality of the measurement points planning will directly affect the quality of the measurement data and the measurement efficiency. This paper proposes a planning method for measurement points on the outer surface of components based on lidar automatic measurement technology. First, the geometric features to be measured are discretized into spatial point cloud data. Second, the edge points of the point clouds are extracted and indented to meet the measurement requirements, which improves the measurement accuracy of the edge areas. Finally, by planning the path of the measurement points, the laser beam of the lidar can traverse the points of the measurement features with the shortest paths. Through the analysis of two cases, the method proposed in this paper will provide a huge advantage for the LMS: (1) The edge points of all features can be identified and indented in a short time to ensure the measurement accuracy of the edge areas of each measurement feature. (2) Through the measurement path planning, the repetitive measurement path of the lidar can be significantly reduced, improving the measurement efficiency. The method proposed in this paper has important guiding significance for the subsequent measurement station planning and constructing large-scale spatial measurement fields of the LMS.Keywords
Funding Information
- National Defense Basic Scientific Research Program of China (JCKY2020605C014)
- Postdoctoral Science Foundation of Jiangsu Province (2022ZB217)
This publication has 15 references indexed in Scilit:
- Grid generation on free-form surface using guide line advancing and surface flattening methodAdvances in Engineering Software, 2017
- Laser trackers for large-scale dimensional metrology: A reviewPrecision Engineering, 2016
- An automatic grid generation approach over free-form surface for architectural designJournal of Central South University, 2014
- Surface Meshing with Curvature ConvergenceIEEE Transactions on Visualization and Computer Graphics, 2013
- Dynamic grid for mesh generation by the advancing front methodComputers & Structures, 2013
- On the use of the extended finite element method with quadtree/octree meshesInternational Journal for Numerical Methods in Engineering, 2011
- Indoor GPS: system functionality and initial performance evaluationInternational Journal of Manufacturing Research, 2008
- An extended advancing front technique for closed surfaces mesh generationInternational Journal for Numerical Methods in Engineering, 2007
- Interpolating and meshing 3D surface gridsInternational Journal for Numerical Methods in Engineering, 2003
- A Comparison of Two Well Known Models for 7- Parameter TransformationAustralian Surveyor, 2002