Effect of Non-Uniformity of Rotor Stagger Angle on the Stability of a Low-Speed Axial Compressor
Open Access
Abstract
It is well known that variations in stagger angle between rotor blades affect compressor performance. In this paper, the stagger angle of blade No. 8 is increased or decreased by six degrees for non-uniformity, and the influence of rotor non-uniformity caused by the change in only one blade stagger angle on the performance and stability of the compressor is investigated. The experimental results show that whether the local rotor stagger angle increases or decreases, the compressor stability will deteriorate. If the stagger angle of blade No. 8 is reduced by six degrees, the flow coefficient at the stall point increases by 8.5%. If the stagger angle of blade No. 8 is increased by six degrees, the flow coefficient at the stall point increases by 1.5%. The reason for the deterioration of compressor stability caused by the local non-uniform rotor stagger angle is explored. When the stagger angle of rotor blade No. 8 deviates from the designed state, the load of blade No. 8 and the surrounding blades will change. The load on rotor blade No. 8 increases when the stagger angle decreases. In the near-stall condition, blade No. 8 becomes the “dangerous blade” that triggers the stall. As the stagger angle of rotor blade No. 8 increases, the load on blade No. 8 decreases. However, the load on blade No. 9 increases due to flow redistribution and blade No. 9 becomes a “dangerous blade” that triggers stall. The “dangerous blade” caused by the non-uniformity of stagger angle is the direct reason for the advance of the compressor rotating stall.Keywords
Funding Information
- National Science and Technology Major Project (2017-II-0004-0017)
This publication has 20 references indexed in Scilit:
- Origins and Structure of Spike-Type Rotating StallJournal of Turbomachinery, 2015
- Multiple pure tone noise predictionJournal of Sound and Vibration, 2014
- The effect of aerodynamic asymmetries on turbomachinery flutterJournal of Fluids and Structures, 2013
- The Effect of Stagger Variability in Gas Turbine Fan AssembliesJournal of Turbomachinery, 2006
- Influence of Flow Coefficient, Stagger Angle, and Tip Clearance on Tip Vortex in Axial CompressorsJournal of Fluids Engineering, 2006
- Computation of Mistuning Effects on Cascade FlutterAIAA Journal, 2001
- The Effect of Circumferential Aerodynamic Detuning on Coupled Bending-Torsion Unstalled Supersonic FlutterJournal of Turbomachinery, 1986
- Forced Response Analysis of an Aerodynamically Detuned Supersonic Turbomachine RotorJournal of Vibration and Acoustics, 1986
- Flutter of turbofan rotors with mistuned bladesAIAA Journal, 1984
- Multiple tone generation by transonic compressorsJournal of Sound and Vibration, 1971