Control of three-dimensional separation due to sharp fins using co-rotating vanes ahead of quasi-conical and conical zones
- 1 October 2022
- journal article
- conference paper
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (10) , 106111
Abstract
This experimental investigation studies the effect of an array of 30° inclined co-rotating vanes in controlling a three-dimensional interaction generated by a 15° semi-infinite sharp fin at Mach 2.05. The array is located upstream of the quasi-conical and conical zones of interaction. The primary objective is to study variation in (i) vane chord length c/h = 7.2, 4.2, and 2.5 and (ii) vane height h/δ = 0.3, 0.5, and 0.75 for c/h = 2.5 case in controlling the interaction. Control with the smallest chord length of c/h = 2.5 and h/δ = 0.75 shows the most promising result relative to vanes with longer chord lengths. The vortex trails from this configuration penetrate deeply into the quasi-conical zone of interaction, thereby modifying it both azimuthally and radially. The plateau pressure in the conical region of interaction shows a reduction of approximately 60% with an accompanied reduction in the separation shock strength by nearly 70% for this case. Implementing control in either quasi-conical or conical zones reduces the overall control effectiveness considerably. Removing vanes ahead of quasi-conical zone reduces the effectiveness of favorably modifying the flow development in this region. The bow shock formed ahead of the first vane interacts with the three-dimensional interaction creating a pressure jump that separates the region of vortex influence from that of no control.Keywords
Funding Information
- Aeronautics Research and Development Board
This publication has 32 references indexed in Scilit:
- Review of the physics of swept-shock/boundary layer interactionsProgress in Aerospace Sciences, 1996
- Quasiconical free interaction between a swept shock and a turbulent boundary layerAIAA Journal, 1993
- Numerical investigation of bleed on three-dimensional turbulent interactions due to sharp finsAIAA Journal, 1991
- Inception length to a fully developed, fin-generated, shock-wave, boundary-layer interactionAIAA Journal, 1991
- Numerical simulation of a three-dimensional shock wave-turbulent boundary layer interaction generated by a sharp fin at Mach 4Computing Systems in Engineering, 1990
- Conical similarity of shock/boundary-layer interactions generated byswept and unswept finsAIAA Journal, 1985
- Surface phenomena in a three-dimensional skewed shock wave/laminar boundary-layer interactionAIAA Journal, 1984
- An experimental study of the interaction between a glancing shock wave and a turbulent boundary layerJournal of Fluid Mechanics, 1982
- On the Structure of Three-Dimensional Shock-Induced Separated Flow RegionsAIAA Journal, 1976
- Turbulent Boundary Layer in Compressible FluidsJournal of the Aeronautical Sciences, 1951