Study on Solidification Cracking Under High-speed Narrow Gap Welding with Tandem Torches
Authors:
- 1 January 2015
- journal article
- Published by Japan Welding Society in QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
- Vol. 33 (2) , 190s-194s
Abstract
In this research, the influence of various factors on solidification cracking under high-speed gap welding was investigated by nonlinear thermal-elastic-plastic analysis using the finite element method (FEM). To investigate the formation of cracks, the plastic strain increment in the brittleness temperature range (BTR) was introduced. In addition, to perform thermal-elastic-plastic analysis of a practical three-dimensional model, Idealized Explicit FEM was employed. In the simulations, the penetration shape was compared between the experimental measurement and the analyses to evaluate the analysis accuracy. As a result, it was found that the penetration shapes agree with each other. The heat input, welding speed, and torch distance were changed and the distribution of the BTR plastic strain increment was also compared to show the influence of the welding conditions. From the investigations, it was found that the BTR plastic strain increment increases with heat input, welding speed and decreases with torch distance.Keywords
This publication has 5 references indexed in Scilit:
- Development of Parallelized Idealized Explicit FEM Using GPUQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2013
- Susceptibility and Occurrence Condition of HAZ Liquation Cracking on Rail Steels. Study on Rail Welding with High-C Welding Materials. (Report 4).QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1996
- Weld crack susceptibility of duplex stainless steel. (Report V). Numerical analysis on solidification brittleness temperature range in stainless steel.QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1991
- Ductility-dip cracking in weld metal of Fe-36%Ni alloy (Report I) - Behaviors of hot cracking and its dependency on chemical composition.QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1985
- Studies on Solidification Crack Susceptibility for Weld Metals with Trans-Varestraint Test (1)JOURNAL OF THE JAPAN WELDING SOCIETY, 1972