Fatigue of thin-walled tubes in copper alloy CuNi10
- 1 April 2015
- journal article
- research article
- Published by Taylor & Francis in Ships and Offshore Structures
- p. 1-6
Abstract
The current work concerns the investigation of the fatigue resistance of CuNi10 tubes, which are frequently used in heat exchangers of large ship engines. The lifetime performances of the exchanger tubes are greatly affected by the environmental conditions, where especially the temperature fluctuations and the harsh chloride environment cause fatigue and corrosion problems, respectively. A failure of the tubes will trigger an instantaneous shutdown of the engine. Thus, the paper will focus on a model for fatigue life estimation of the CuNi10 material. In the current case of a ship engine, the temperature fluctuations occur when the engine starts and stops. The difference in temperature at cool down or warm up between the exchanger and the exchange media will cause straining of the tubes. To investigate this phenomenon, a series of strain-based fatigue tests are carried out. Results are evaluated by means of the ASTM E739 guideline and one-sided tolerance limits factor method. The tests show good fatigue resistance and the risk for a failure is low in aspect to the case of a ship heat exchanger.Keywords
This publication has 20 references indexed in Scilit:
- Behaviour of reinforced thermoplastic pipe (RTP) under combined external pressure and tensionShips and Offshore Structures, 2013
- Statistical Characteristics of Fatigue Failure of Copper Thin FilmsJournal of Engineering Materials and Technology, 2013
- Estimations of mechanical properties and fatigue life in pre-strained conditionsJournal of the Chinese Institute of Engineers, 2012
- Experimental investigation on the effect of low temperatures on the fatigue strength of welded steel jointsShips and Offshore Structures, 2012
- The Cyclic Deformation Behavior of Severe Plastic Deformation (SPD) Metals and the Influential FactorsMetals, 2012
- Evaluation of low cycle fatigue life in AZ31 magnesium alloyInternational Journal of Fatigue, 2007
- Cyclic deformation behaviour and fatigue crack propagation in AZ91HP and AM50HPMaterials Science and Technology, 2001
- Overview of fatigue performance of Cu processed by severe plastic deformationJournal of Electronic Materials, 1999
- A Strain-Based Fatigue Reliability Analysis MethodJournal of Mechanical Design, 1995
- One-sided tolerance limits for a normal population based on censored samplesJournal of Statistical Computation and Simulation, 1973