Experimental Validation of a Miniaturized Receiver Designed for Real-Time GNSS-R Altimetry on UAV Platforms

Authors:

Abstract
Accurate acquisition of unmanned aerial vehicle (UAV) altitude relative to the ground is essential for applications such as aerial mapping and precision agriculture. Although Global Navigation Satellite System Reflectometry (GNSS-R) has demonstrated potential for airborne altimetry, its deployment on UAV platforms is limited by payload and power constraints. To the best of our knowledge, this study presents the first miniaturized GNSS-R receiver specifically developed for UAV platforms that supports real-time altimetry. The system enables 5 Hz height inversion with low power consumption and rapid response. A real-time correction framework is implemented to reduce motion-related errors. System performance was evaluated through static and dynamic experiments. The static reservoir water level test achieved a root-mean-square error (RMSE) of 16.67 cm, while dynamic UAV experiments over a land-based bare soil surface yielded an RMSE of 1.825 m, with retrieval precision improving at higher flight altitudes and degrading at lower altitudes due to waveform aliasing effects. These results demonstrate the reliability and feasibility of the proposed system for UAV-based real-time airborne altimetry, particularly in applications requiring rapid deployment and operational flexibility, such as emergency surveying and environmental monitoring.
Funding Information
  • Feng Yun 3 (FY-3) Global Navigation Satellite System Occultation Sounder Development and Manufacture Project led by NSSC, CAS

This publication has 15 references indexed in Scilit: