Open Access
- 14 August 2024
- journal article
- research article
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 66 (9) , 095015
Abstract
Linear plasma devices (LPD) utilizing a helicon plasma source, a high density light ion source, can generate impurities due to progressive erosion of the radio frequency (RF) transmission window caused by rectified sheath voltage. These source-born impurities can entrain and be transported by the plasma toward a target, affecting plasma-material interaction studies. Earlier work on material testing in Prototype-Materials Plasma Exposure eXperiment at ORNL revealed significant source impurity deposition on downstream targets. However, using a similar RF source, no target impurity deposition is observed in Plasma Interaction Surface Component Experimental Station (PISCES)-RF despite evidence of RF window erosion in the source region, thereby motivating the present work. Experimentally, using various magnetic field configurations upstream of the PISCES-RF plasma source and seeding titanium (Ti) impurities at various axial locations, impurity transport and deposition along the machine axis were investigated. It was found that Ti deposition was localized to the side of the plasma source where the Ti impurity was seeded. In contrast, aluminum (Al) deposition, originating from the sputtering of the helicon window, occurred predominantly upstream of the plasma source, suggesting an asymmetry in the axial transport of eroded RF window material. These observations suggest a stagnation of the parallel plasma flow immediately downstream of the plasma source, with impurity ions remaining unmagnetized near the source upstream. Al deposition in magnetic field-free regions in PISCES-RF indicates that sputtered Al impurities likely remained neutral due to their large ionization mean-free path under PISCES-RF conditions. Plasma modeling and simulation supported this, indicating that Al-neutrals transport toward the helicon source upstream for low electron density cases. It was found that the Larmor radius of the Al ions was greater than the plasma radius towards the source upstream and remained weakly magnetized in PISCES-RF, meaning that plasma source-born impurities are not efficiently entrained in the plasma flow. These findings provide critical insights into impurity transport in helicon plasma-based LPDs.Keywords
Funding Information
- DOE
- Office of Science, Office of Fusion Energy Science (DE-AC-5-00OR22725)
This publication has 21 references indexed in Scilit:
- Pisces-RF: A helicon-plasma based linear-device for the study of fusion relevant plasma-materials-interactionsNuclear Materials and Energy, 2023
- RF sheath induced sputtering on Proto-MPEX. I. Sheath equivalent dielectric layer for modeling the RF sheathPhysics of Plasmas, 2021
- GITR: An accelerated global scale particle tracking code for wall material erosion and redistribution in fusion relevant plasma–material interactionsComputer Physics Communications, 2021
- Accelerated/reduced growth of tungsten fuzz by deposition of metalsJournal of Nuclear Materials, 2021
- Development of the materials analysis and particle probe for Proto-MPEXReview of Scientific Instruments, 2021
- The Material Plasma Exposure eXperiment: Mission and conceptual designFusion Engineering and Design, 2020
- Influence of heavier impurity deposition on surface morphology development and sputtering behavior explored in multiple linear plasma devicesNuclear Materials and Energy, 2019
- F-TRIDYN simulations of tungsten self-sputtering and applications to coupling plasma and material codesComputational Materials Science, 2018
- Plasma flow measurements in the Prototype-Material Plasma Exposure eXperiment (Proto-MPEX) and comparison with B2.5-Eirene modelingPhysics of Plasmas, 2018
- F-TRIDYN: A Binary Collision Approximation code for simulating ion interactions with rough surfacesJournal of Nuclear Materials, 2017