Study of pyrolysis of ulin wood residues
- 1 January 2016
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1741 (1) , 050004
Abstract
As abundant resources, ulin wood residues could be converted into bioenergy through pyrolysis process. To detail analysis, the pyrolyzer reactor was connected to micro GC for online gas analysis. By comparing to other biomass e.g. pinewood and low-grade coal, the ulin wood residues exhibited similar result when the pyrolysis process started around 400 °C. The char product decreased as elevated temperature due to gasification process. Based on the gas analysis, this pyrolysis produced a gas product which predominant composed of CO. The SEM analysis also showed that the pyrolysis treatment resulted in fine char with nanopores particles. Hence, the reactivity of the solid product would be increased significantly. Therefore, the ulin wood residues could be other alternatives as a renewable energy source through pyrolysis process.Keywords
This publication has 10 references indexed in Scilit:
- Optimum temperatures for carbon deposition during integrated coal pyrolysis–tar decomposition over low-grade iron ore for ironmaking applicationsFuel Processing Technology, 2014
- Carbon Deposition Using Various Solid Fuels for Ironmaking ApplicationsEnergy & Fuels, 2013
- Torrefaction2013
- Biofuels from Agricultural BiomassEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2009
- Pyrolysis of Wood/Biomass for Bio-oil: A Critical ReviewEnergy & Fuels, 2006
- Influence of pyrolysis conditions on the structure and gasification reactivity of biomass charsFuel, 2004
- Renewable fuels and chemicals by thermal processing of biomassChemical Engineering Journal, 2003
- Thermogravimetric Analysis and Devolatilization Kinetics of WoodIndustrial & Engineering Chemistry Research, 2002
- Product Distribution from Pyrolysis of Wood and Agricultural ResiduesIndustrial & Engineering Chemistry Research, 1999
- Pyrolysis characteristics of biomass and biomass componentsFuel, 1996