Contactless conductometric determination of methanol and ethanol in samples containing water after their electrophoretic desalination
- 29 May 2015
- journal article
- research article
- Published by Wiley in Electrophoresis
- Vol. 36 (16) , 1976-1981
Abstract
Determination of the contents of methanol and ethanol in aqueous solutions was performed by measuring the permittivity of solutions using a contactless conductivity detector (C4D) normally used for detection in capillary electrophoresis. The detection cell is a section of a fused silica capillary with an internal diameter of 50 μm with a pair of conductivity electrodes on the external walls. The C4D response to samples of methanol/water and ethanol/water mixtures is linear in the concentration interval of approx. 40–100% v/v alcohol content. In the analysis of technical samples of methanol and ethanol, the determination is disturbed by the presence of even trace amounts of salts. This interference can be effectively eliminated by integrated electrophoretic desalination of the sample by the application of a direct current electric voltage with a magnitude of 10 kV to the capillary with the injected sample zone. Under these conditions, the ions migrate out of the sample zone and the detector response is controlled purely by the permittivity of the solvent/water zone. Desalinating is effective for NaCl contents in the range from 0 to 5 mmol/L NaCl. The effectiveness of the desalinating process has been verified on MeOH/water samples and in determination of the ethanol content in distilled beverages normally available in the retail network.Keywords
This publication has 44 references indexed in Scilit:
- Contactless Impedance Sensors and Their Application to Flow MeasurementsSensors, 2013
- Some Possibilities and Limitations of Contactless Impedimetric Determinations of Organic Liquids in Aqueous Solutions. The Interference from Ionic CompoundsElectroanalysis, 2010
- A test method for determining water in organic solventsJournal of Analytical Chemistry, 2010
- Voltammetric Method for Determining the Trace Moisture Content of Organic Solvents Based on Hydrogen-Bonding Interactions with QuinonesAnalytical Chemistry, 2010
- Neutral and ionic reaction mechanisms for the allylation of aldehydes by bipyridine N,N′-dioxidesChemical Communications, 2009
- Progress and recent trends in biodiesel fuelsEnergy Conversion and Management, 2009
- A Method for Detecting Water in Organic SolventsOrganic Letters, 2008
- An automated FTIR method for the routine quantitative determination of moisture in lubricants: An alternative to Karl Fischer titrationTalanta, 2007
- Overview on the challenges and developments of micro-direct methanol fuel cells (DMFC)Journal of Power Sources, 2007
- Determination of water traces in various organic solvents using Karl Fischer method under FIA conditionsTalanta, 2000