Synthesis and characterization of PSF/PES composite membranes for use in oily wastewater treatment
Authors:
- M.S RameetseMRM.S Rameetse
- O.A AberefaOAO.A Aberefa
- M.O DaramolaMDM.O Daramola
Open Access
- 1 December 2019
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1378 (2)
Abstract
Environmental sustainability requires development of environmentally benign and energy efficient technology for treatment and disposal of wastewater. Membrane technology has emerged as a highly viable method for water treatment throughout the years. However, their limited commercial application has prompted a lot of researchers to explore different approaches to modify the membranes to enhance their performance. Polymer blending is one of the modifying techniques currently being explored to develop materials with unique anticipated properties depending on the type of membrane needed. This technique has shown improvement in the quality of the membrane by enhancing the mechanical strength as well as the performance of the membrane. In this study, blended polysulfone (PSF) and polyethersulfone (PES) membranes were synthesized at different PSF:PES ratios (100%:0%, 0%:100%, 50%:50%, 80%:20%, 20%:80% and 25%:75%) using N-Methyl-2-pyrrolidone (NMP) as a solvent via the phase inversion method. The quality and integrity of the membranes were checked via Scanning electron microscopy (for morphology); Thermogravimetric analysis (for thermal stability), Atomic force microscopy (for surface nature) and nanotensile measurement for mechanical strength. The flux, % rejection and porosity as the performance criteria of membranes showed a massive improvement in majority of the blended membranes than in pure PES and PSF membranes. AFM images indicated lower roughness in the pure PSF membrane as compared to the blended membranes. The tensile strength only improved on the 25%:75% membrane while the elasticity increased with an increase in PES concentration in the blended membranes. These results demonstrate the diversity of blending polymeric membranes to modify specific properties for desired function and highlight the possibility of more commercial application.Keywords
This publication has 14 references indexed in Scilit:
- Fabrication and characterization of a polysulfone-graphene oxide nanocomposite membrane for arsenate rejection from waterJournal of Environmental Health Science and Engineering, 2015
- Membrane technology enhancement in oil–water separation. A reviewDesalination, 2015
- Increase in hydrophilicity of polysulfone membrane using polyethylene glycol methyl etherJournal of Membrane Science, 2013
- Metals Ions Removal by Polymer Membranes of Different PorosityThe Scientific World Journal, 2013
- Composition and fate of gas and oil released to the water column during the Deepwater Horizon oil spillProceedings of the National Academy of Sciences, 2011
- Effect of solvents on performance of polyethersulfone ultrafiltration membranes: Investigation of metal ion separationsDesalination, 2011
- Ultrafiltration of stable oil-in-water emulsion by polysulfone membraneJournal of Membrane Science, 2008
- Definition of terms related to polymer blends, composites, and multiphase polymeric materials (IUPAC Recommendations 2004)Pure and Applied Chemistry, 2004
- Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranesJournal of Membrane Science, 2001
- MEMBRANE PREPARATION | Phase Inversion Membranes2000