Velocity control of omni drive robot using PID controller and dual feedback
Authors:
- Amit KharatAKAmit Kharat
- Purva JoshiPJPurva Joshi
- Rahul PakhareRPRahul Pakhare
- Unmesh DatarUDUnmesh Datar
- Vaibhav KhotreVKVaibhav Khotre
- 1 January 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 295-299
Abstract
This paper concentrates on navigation of four wheel omni drive robot system with velocity control. The system has two feedback systems, viz. rotary encoders and laser distance sensors. The following paper assumes that these paths can be defined mathematically in terms of curves like straight line, circle, ellipse or any other mathematically defined curve or as a part of these curves. Two feedback systems enable the robot to navigate the specific path accurately and reliably. This paper explains the velocity equations of the each wheel of the drive required to navigate the path. The laser distance sensor system assists the robot to maintain its trajectory by providing real time position of the robot. The closed loop system of PID controller and rotary encoder provides the required accurate velocity to each wheel which is calculated according to the mathematical equations. As a result the robot moves to the destination point along the specific path with desired velocity.Keywords
This publication has 2 references indexed in Scilit:
- Spatial Trajectory Tracking Control of Omni-directional Wheeled Robot Using Optical Flow Sensors2007 IEEE International Conference on Control Applications, 2007
- Architecture Control and Model Identification of a Omni-Directional Mobile Robot2005