Cross-linked aromatic cationic polymer electrolytes with enhanced stability for high temperature fuel cell applications
- 2 April 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 5 (6) , 7617-7625
Abstract
Diamine-cross-linked membranes were prepared from cross-linkable poly(arylene ether ketone) containing pendant cationic quaternary ammonium group (QPAEK) solution by a facile and general thermal curing method using 4,4′-diaminodiphenylmethane with rigid framework and 1,6-diaminohexane with flexible framework as cross-linker, respectively. Self-cross-linked cationic polymer electrolytes membranes were also prepared for comparison. The diamines were advantageously distributed within the polymeric matrix and its amine function groups interacted with the benzyl bromide of QPAEK, resulting in a double anchoring of the molecule. Combining the excellent thermal stability, the addition of a small amount of diamines enhanced both the chemical and mechanical stability and the phosphoric acid doping (PA) ability of membranes. Fuel cell performance based on impregnated cross-linked membranes have been successfully operated at temperatures up to 120 °C and 180 °C with unhumidified hydrogen and air under ambient pressure, the maximum performance of diamine-cross-linked membrane is observed at 180 °C with a current density of 1.06 A cm−2 and the peak power density of 323 mW cm−2. The results also indicate that the diamine-cross-linked membranes using the rigid cross-linker show much improved properties than that using the flexible cross-linker. More properties relating to the feasibility in high temperature proton exchange membrane fuel cell applications were investigated in detail.Keywords
This publication has 37 references indexed in Scilit:
- Proton Conductivity in Sulfonic Acid-Functionalized Zeolite Beta: Effect of Hydroxyl GroupChemistry of Materials, 2008
- Synthesis of Poly(arylene ether) Copolymers Containing Pendant PEO Groups and Evaluation of Their Blends as Proton Conductive MembranesMacromolecules, 2005
- State of Understanding of NafionChemical Reviews, 2004
- Sulfonated Poly(aryl ether ketone)s Containing the Hexafluoroisopropylidene Diphenyl Moiety Prepared by Direct Copolymerization, as Proton Exchange Membranes for Fuel Cell ApplicationMacromolecules, 2004
- High temperature proton conducting hybrid polymer electrolyte membranesSolid State Ionics, 2002
- Materials for fuel-cell technologiesNature, 2001
- Development of ionomer membranes for fuel cellsJournal of Membrane Science, 2001
- Proton-conducting polymer electrolyte membranes based on hydrocarbon polymersProgress in Polymer Science, 2000
- Improvement of CO tolerance of proton exchange membrane (PEM) fuel cells by a pulsing techniquePhysical Chemistry Chemical Physics, 2000
- Status of solid polymer fuel cell system developmentJournal of Power Sources, 1994