Emerging investigator series: low doses of electron beam irradiation effectively degrade 1,4-dioxane in water within a few seconds
- 5 July 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
- Vol. 9 (9) , 2226-2237
Abstract
The application of electron beam (e-beam) technology for water treatment has been proposed to be a faster and safer approach to decomposing persistent contaminants in water, because of its ability to rapidly generate high amounts of both oxidizing and reducing reactive species without the addition of chemicals. In this study, we utilized a lab-scale 9 MeV e-beam accelerator to investigate the feasibility of treating 1,4-dioxane in various water matrices in batches with low sample volumes (−1), without the need for any sample modification or pH adjustment. Low dissolved oxygen in the solution enhanced the degradation efficiency by 21–23% when treating 1000 mg L−1 of 1,4-dioxane, presumably because of the increased H˙ and O˙− that can react with 1,4-dioxane. Although the degrading intermediates were not fully mineralized to carbon dioxide at the tested doses, the detected intermediates, such as aldehydes and organic acids, were not as persistent as 1,4-dioxane and were more vulnerable to conventional treatment methods and natural attenuation. The slowest reaction rate constant was observed when treating wastewater samples (k = 0.13–0.62 kGy−1), followed by contaminated groundwater (k = 0.16–1.4 kGy−1), suggesting other organics and ions could scavenge the generated reactive species. The electrical energy per order (EE/O) ranged from 0.39 (DI water) to 6.3 (wastewater) kWh m−3 per order, depending on the initial concentration of 1,4-dioxane and water matrix. The EE/O values were comparable to other traditional advanced oxidation processes (AOPs) to treat 1,4-dioxane, suggesting the feasibility of utilizing e-beam to treat contaminated waters. The organic carbon content of the sample positively correlated (R2 >0.9) with the EE/O values and thus can be utilized to predict e-beam treatment performance. Our results show that e-beam radiolysis is a promising technology to treat 1,4-dioxane and could potentially outperform other AOPs and 1,4-dioxane disposal methods (e.g., incineration) in terms of energy consumption and treatment time, leaving no trace of oxidants.Keywords
Funding Information
- U.S. Department of Energy (DE-SC0020277)
This publication has 58 references indexed in Scilit:
- Degradation and toxicity assessment of sulfamethoxazole and chlortetracycline using electron beam, ozone and UVJournal of Hazardous Materials, 2012
- Removal of iopromide and degradation characteristics in electron beam irradiation processJournal of Hazardous Materials, 2012
- Effects of Ozone-Gas Bubble Size and pH on Ozone/UV TreatmentOzone: Science & Engineering, 2011
- Impact of IX-UF Pretreatment on the Feasibility of UV/H2O2Treatment for Degradation of NDMA and 1,4-DioxaneOzone: Science & Engineering, 2010
- Degradation of 1,4-dioxane in water using TiO2 based photocatalytic and H2O2/UV processesJournal of Hazardous Materials, 2007
- Occurrence and Treatment of 1,4-Dioxane in Aqueous EnvironmentsEnvironmental Engineering Science, 2003
- Mechanism of the Degradation of 1,4-Dioxane in Dilute Aqueous Solution Using the UV/Hydrogen Peroxide ProcessEnvironmental Science & Technology, 1998
- Ferrioxalate-mediated photodegradation of organic pollutants in contaminated waterWater Research, 1997
- Critical Review of rate constants for reactions of hydrated electrons, hydrogen atoms and hydroxyl radicals (⋅OH/⋅O− in Aqueous SolutionJournal of Physical and Chemical Reference Data, 1988
- Electron spin resonance study of the rate constants for reaction of hydrogen atoms with organic compounds in aqueous solutionThe Journal of Physical Chemistry, 1971