Role of RF Magnetron Sputtering Power on Optical and Electrical Properties of ITO Films on Soda-Lime Glass Substrates
Authors:
- R.I.M. AsriRAR.I.M. Asri
- N.A. HamzahNHN.A. Hamzah
- M.A. AhmadMAM.A. Ahmad
- M.IKram Md TaibMTM.IKram Md Taib
- S.M.S. SahilSSS.M.S. Sahil
- Z. HassanZHZ. Hassan
Open Access
- 1 May 2020
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1535 (1)
Abstract
The optical and electrical properties of indium tin oxide (ITO) thin films grown on soda-lime glass substrates using a radio frequency (RF) magnetron sputtering technique were studied as a function of the sputtering RF power. Fixed 100 nm thickness of ITO films were deposited on the soda-lime glass substrates at 300 °C, using RF powers ranging between 50 to 150 W. The optical and electrical properties of the sputtered ITO films were characterized by Ultraviolet–Visible Spectroscopy (UV-Vis), Hall Effect Measurement and Atomic Force Microscope (AFM). Varying the substrate temperature and RF sputtering power affected surface roughness to decrease from 5.80, 4.59 and 3.46 nm while the resistivity also decreased from 18.73 x 10−4, 6.484 x 10−4 and 2.421 x 10−4 Ω.cm. Deposition of ITO thin films on soda-lime glass substrates by RF magnetron sputtering at 300 °C substrate temperature contributed to 74 to 79 % of optical transmittance in the 450 nm region. Results of this study suggested that a better performance of both optical transparency and electrical conductivity of ITO films can be achieved by operating at high temperature substrate and high level of sputtering power.Keywords
This publication has 20 references indexed in Scilit:
- Optimization of low temperature RF-magnetron sputtering of indium tin oxide films for solar cell applicationsApplied Surface Science, 2019
- High-luminous efficacy green light-emitting diodes with InGaN/GaN quasi-superlattice interlayer and Al-doped indium tin oxide filmJournal of Alloys and Compounds, 2019
- Ultra-low thermal conductivity of nanogranular indium tin oxide films deposited by spray pyrolysisApplied Physics Letters, 2017
- Recent progress on thin-film encapsulation technologies for organic electronic devicesOptics Communications, 2016
- Sol–gel versus sputtering indium tin oxide films as transparent conducting oxide materialsJournal of Materials Science: Materials in Electronics, 2016
- Dependence of Ga-doped ZnO thin film properties on different sputtering process parameters: Substrate temperature, sputtering pressure and bias voltageThin Solid Films, 2015
- Effect of oxygen flow rate on ITO thin films deposited by facing targets sputteringThin Solid Films, 2010
- Present status of transparent conducting oxide thin-film development for Indium-Tin-Oxide (ITO) substitutesThin Solid Films, 2008
- Transparent and conducting ITO films: new developments and applicationsThin Solid Films, 2002
- Electrical and optical properties of electron beam evaporated ITO thin filmsSurface and Coatings Technology, 2000