Dynamic research and analysis for a wheel-legged harvester chassis during tilting process
Authors:
Open Access
- 14 June 2019
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 11 (6)
Abstract
This article aims to analyze the dynamic tilting characteristics of a four-wheel-legged harvester chassis. In order to achieve the pose and position of the chassis, kinematic model of a four-wheel-legged harvester chassis was established by the screw theory method. After analyzing the actual motion of the chassis during tilting process, dynamic tilting model of the wheel-legged articulated steering chassis was achieved based on the Lagrange’s equation. To prove the accuracy of the dynamic model, simulations of the chassis was conducted under ADAMS environment. Three series of comparisons showed that results between simulations and calculations were highly consistent. Both results showed that lifting the tilting side wheel-legs, shortening the other side legs, and steering to the tilting side could help prevent tilting of the chassis. Lifting the tilting side wheel-legs was proved to be more efficient than shortening that of the other sides. Average error of the change rates between simulations and calculations were 2.4%, 0.67%, and 2.75%.Keywords
Funding Information
- National Natural Science Foundation of China (No. 31300596)
- Fundamental Research Funds for the Central Universities (No. 2015ZCQ-GX-04)
This publication has 10 references indexed in Scilit:
- Optimization of hydropneumatic suspension for articulated wheel loader based on kriging model and particle swarm algorithmAdvances in Mechanical Engineering, 2018
- An Overview on the Design of Mobile Robots with Hybrid LocomotionAdvanced Materials Research, 2013
- Dynamics and wheel's slip ratio of a wheel-legged robot in wheeled motion considering the change of heightChinese Journal of Mechanical Engineering, 2012
- Review article: locomotion systems for ground mobile robots in unstructured environmentsMechanical Sciences, 2012
- Development and field testing of the FootFall planning system for the ATHLETE robotsJournal of Field Robotics, 2012
- Development Status of Micromanipulator Technology for Biomedical ApplicationsJournal of Mechanical Engineering, 2011
- Obstacle-surmounting Mechanism and Capability of Four-track Robot with Two Swing ArmsRobot, 2010
- Robust state feedback stabilization of articulated steer vehiclesVehicle System Dynamics, 2007
- Kinetostatic Design Considerations for an Articulated Leg-Wheel Locomotion SubsystemJournal of Dynamic Systems, Measurement, and Control, 2005
- Innovative design for wheeled locomotion in rough terrainRobotics and Autonomous Systems, 2002