Abstract
This manuscript proposes a novel extended-channel gate-stacked heterojunction tunnel field-effect transistor, simulated using Synopsys Sentaurus TCAD with relevant physical models. The proposed device incorporates an extended-channel with SiGe as the source material, along with an L-shaped pocket and a dielectric pocket (DP). Device performance is analyzed for varying germanium mole fractions in Si 1– x Ge x at 300 K, where an increase in the mole fraction enhances I ON , accompanied by a rise in I OFF . Likewise, structural optimizations include comparison of source materials (Si and Si 1– x Ge x ), source doping variations, and evaluation of DP inclusion. The suggested TFET achieves a high I ON of 3.52 × 10 −4 A µ m −1 , an excellent I ON /I OFF ratio of 2.79 × 10 13 , and a steep SS of 10.52 mV dec −1 at mf = 0.3, along with an I AMB of 3.46 × 10 −17 A µ m −1 . Notable radio frequency (RF) achievements include a f T of 62.4 GHz, a gain-bandwidth product of 5.78 GHz, and an f max of 671 GHz, along with a reduced transit time, collectively indicating the high-speed capability of the proposed device and making it well-suited for low-power analog circuits and RF amplification. The device performance is systematically evaluated under interface trap charges with Uniform and Gaussian distributions for varying mole fractions. The analysis indicates that trap-induced degradation affects both I ON and I OFF , with I OFF showing a markedly greater degradation compared with the relatively moderate reduction in I ON . Additionally, Flicker, Diffusion and Generation–Recombination noise are analyzed up to 10 11 Hz in terms of S ID . Finally, benchmarking against existing designs demonstrates improved figures of merit, thereby confirming the superior performance of the proposed device.

This publication has 74 references indexed in Scilit: