Characteristics and model of sludge adhesion during thermal drying
Authors:
- 1 March 2013
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 34 (6) , 807-812
Abstract
During sludge thermal drying, the sludge adhered on the heated surface of drying equipments may affect drying efficiency. Sludge thermal drying experiments were conducted to investigate the effect of different drying conditions on sludge adhesion. The mass of sludge adhered on the heated surface (dryer wall) reached the maximum when sludge water content was about 60%. A high drying temperature would result in more sludge adhered on the heated surface in the temperature range of 80–160°C. The convection heating and rougher surface would also lead to more sludge adhered on the heated surface. The relation between the maximum mass of adherent sludge and drying temperatures could be described by an exponential equation.Keywords
This publication has 17 references indexed in Scilit:
- Evolution of bioaggregate strength during aerobic granular sludge formationBiochemical Engineering Journal, 2011
- Contribution of Extracellular Polymeric Substances (EPS) to the Sludge AggregationEnvironmental Science & Technology, 2010
- A study on the dewatering of industrial waste sludge by fry-drying technologyJournal of Hazardous Materials, 2009
- Adhesion characteristics of nitrifying bacteria in activated sludgeWater Research, 2008
- Control of Sludge-to-Wall Adhesion by Applying a Polarized Electric FieldDrying Technology, 2007
- Skin Layer on Thermally Dried Sludge CakeDrying Technology, 2006
- Drying of Activated Sludge Under Partial Vacuum Conditions—An Experimental StudyDrying Technology, 2004
- Advanced sludge treatment affects extracellular polymeric substances to improve activated sludge dewateringJournal of Hazardous Materials, 2004
- SLUDGE DEWATERING AND DRYINGDrying Technology, 2002
- HEAT, MOMENTUM, AND MASS TRANSFER MEASUREMENTS IN INDIRECT AGITATED SLUDGE DRYERDrying Technology, 2002