Preparation and Characterization of Pulp and Paper Mill Sludge-Activated Biochars Using Alkaline Activation: A Box–Behnken Design Approach
Open Access
- 2 September 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (36) , 32620-32630
Abstract
This study utilized pulp and paper mill sludge as a carbon source to produce activated biochar adsorbents. The response surface methodology (RSM) application for predicting and optimizing the activated biochar preparation conditions was investigated. Biochars were prepared based on a Box-Behnken design (BBD) approach with three independent factors (i.e., pyrolysis temperature, holding time, and KOH:biomass ratio), and the responses evaluated were specific surface area (SSA), micropore area (S micro), and mesopore area (S meso). According to the RSM and BBD analysis, a pyrolysis temperature of 800 °C for 3 h of holding and an impregnation ratio of 1:1 (biomass:KOH) are the optimum conditions for obtaining the highest SSA (885 m2 g-1). Maximized S micro was reached at 800 °C, 1 h and the ratio of 1:1, and for maximizing S meso (569.16 m2 g-1), 800 °C, 2 h and ratio 1:1.5 (445-473 m2 g-1) were employed. The biochars presented different micro- and mesoporosity characteristics depending on pyrolysis conditions. Elemental analysis showed that biochars exhibited high carbon and oxygen content. Raman analysis indicated that all biochars had disordered carbon structures with structural defects, which can boost their properties, e.g., by improving their adsorption performances. The hydrophobicity-hydrophilicity experiments showed very hydrophobic biochar surfaces. The biochars were used as adsorbents for diclofenac and amoxicillin. They presented very high adsorption performances, which could be explained by the pore filling, hydrophobic surface, and π-π electron-donor-acceptor interactions between aromatic rings of both adsorbent and adsorbate. The biochar with the highest surface area (and highest uptake performance) was subjected to regeneration tests, showing that it can be reused multiple times.Keywords
Funding Information
- VINNOVA
- Sveriges Lantbruksuniversitet
- Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico
- Funda??o de Amparo ? Pesquisa do Estado do Rio Grande do Sul
- Bio4Energy
This publication has 55 references indexed in Scilit:
- Tailoring surfaces of hybrid ceramics for gas adsorption – From alkanes to CO2Separation and Purification Technology, 2014
- Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomassBiomass and Bioenergy, 2014
- The removal of amoxicillin from wastewater using organobentoniteJournal of Environmental Management, 2013
- Pyrolyzed polysiloxane membranes with tailorable hydrophobicity, porosity and high specific surface areaMicroporous and Mesoporous Materials, 2013
- Preparation, characterization and adsorption potential of the NH4Cl-induced activated carbon for the removal of amoxicillin antibiotic from waterChemical Engineering Journal, 2013
- Experimental Design Methodology for the Preparation of Activated Carbon from Sewage Sludge by Chemical Activation ProcessArabian Journal for Science and Engineering, 2012
- Removal of diclofenac sodium from aqueous solution by Isabel grape bagasseChemical Engineering Journal, 2012
- Chemical and leaching properties of paper mill sludgeChemical Speciation & Bioavailability, 2008
- Adsorption of amoxicillin on chitosan beads: Kinetics, equilibrium and validation of finite bath modelsBiochemical Engineering Journal, 2005
- Mesoporous Activated Carbon from Agricultural ByproductsMicrochimica Acta, 2001