Two‐Dimensional‐Woven‐Carbon‐Fiber‐Reinforced Silicon Carbide/Carbon Matrix Composites Produced by Reaction Bonding
Authors:
- 1 May 1999
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 82 (5) , 1355-1357
Abstract
Plane‐woven‐fabric carbon‐fiber‐reinforced SiC/C matrix composites were fabricated at 1450°C via reaction bonding and impregnation with phenolic resin. The relationship between the flexural strength and the open porosity of the composites is dependent on the heat‐treatment temperature before the impregnation. The flexural strength of composites heat‐treated at 1000°C (open porosity of ∼15%) was ∼300 MPa, whereas that of composites heat‐treated at 1450°C (open porosity of ∼12%) was only ∼240 MPa. The heat‐treatment temperatures before the impregnation step might control the interface properties between the fiber and the matrix.Keywords
This publication has 3 references indexed in Scilit:
- Fabrication of Carbon Fiber-Reinforced SiC/C Composites by Reaction-BondingJournal of the Ceramic Society of Japan, 1997
- Fabrication and Mechanical Properties of Reaction Sintered Silicon Carbide Matrix Composite1997
- Carbon Fiber-Reinforced SiC Composites Produced by Reaction-BondingJournal of the Ceramic Society of Japan, 1992