In situ stress distribution law of fault zone in tunnel site area based on the inversion method with optimized fitting conditions
Authors:
Open Access
- 16 January 2023
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Abstract
Tunnel construction in high geo-stress strata faces the risk of extreme natural disasters such as large squeezing deformation and rockburst. Therefore, it is of great significance to adopt a high-precision inversion method to investigate the distribution law of in situ stress in the tunnel site area. In this paper, the in situ stress inversion research was carried out based on a plateau tunnel with a buried depth of more than 1000 m. The idea of improving the inversion accuracy by unifying displacement constraints was proposed by aiming at the defects of the traditional method on the boundary conditions. Furthermore, the impact of the constant term in the regression model on the fitting accuracy was discussed. According to the inversion method with optimized fitting conditions, the in situ stress distribution characteristics in the tunnel site area were obtained, and the variation law of the in situ stress near the fault zone was discussed. The results showed that after unifying displacement constraints, the comprehensive inversion accuracy comprehensive indicator reflecting the inversion accuracy decreased from 15.291 to 12.895, indicating that the inversion error was effectively controlled. Whether the constant term should be retained had a random effect on the inversion accuracy, so it was recommended that this issue be independently verified when fitting the data. When approaching the inner side of the fault from the outer side, the in situ stress first increased slightly and then decreased significantly. Moreover, the wider the fault impact zone and the farther the fault distribution distance, the more significant the amplitude of stress change, e.g., the maximum amplitude of stress change reached 9.0 MPa. In addition, the in situ stress orientation near the fault can be significantly deflected. And the wider the fault impact zone, the more pronounced the deflection.Keywords
Funding Information
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
This publication has 23 references indexed in Scilit:
- Application of the ridge regression in the back analysis of a virgin stress fieldBulletin of Engineering Geology and the Environment, 2021
- Inversion Method of In-situ Stress and Rock Damage Characteristics in Dam Site Using Neural Network and Numerical Simulation—A Case StudyIEEE Access, 2020
- Back Analysis of the Initial Geo-Stress Field of Rock Masses in High Geo-Temperature and High Geo-StressEnergies, 2020
- Inversion Method of Initial In Situ Stress Field Based on BP Neural Network and Applying Loads to Unit BodyAdvances in Civil Engineering, 2020
- Influence of Large Syncline on In Situ Stress Field: A Case Study of the Kaiping Coalfield, ChinaRock Mechanics and Rock Engineering, 2016
- An improved method for estimating in situ stress in an elastic rock mass and its engineering applicationOpen Geosciences, 2016
- A modified initial in-situ Stress Inversion Method based onFLAC3D with an engineering applicationOpen Geosciences, 2015
- Determination of the stress field in a mountainous granite rock massInternational Journal of Rock Mechanics and Mining Sciences, 2014
- Determination of in situ stresses and elastic parameters from hydraulic fracturing tests by geomechanics modeling and soft computingJournal of Petroleum Science and Engineering, 2014
- Estimation of in situ stress along deep tunnels buried in complex geological conditionsInternational Journal of Rock Mechanics and Mining Sciences, 2012