Effects of temperature and aging on furfural partitioning in the oil-paper system of power transformers
Authors:
- 5 August 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 23 (3) , 1393-1401
Abstract
Furfural content in oil is a valuable indicator of cellulose paper degradation and is widely utilized in aging assessment for power transformers. However, with the same aging degree of insulation paper, the actual furfural content in oil is influenced by temperature because furfural partitioning behavior in the oil-paper insulation system of power transformers changes with temperature. Thus, correction of the temperature effect on furfural partitioning is crucial for accurate assessment of the aging of power transformers. In this research, oil-paper samples with different furfural contents were prepared through an accelerated thermal aging test. A furfural equilibrium experiment was conducted at different temperatures to construct a furfural partitioning diagram. The mass fraction of furfural in oil and paper was calculated. Results showed that the mass fraction of furfural in oil increases with temperature rising and aging deepening, which means that furfural tends to migrate from paper to oil at high temperatures and deep aging conditions. The change in furfural partitioning between oil and paper at different temperatures causes a deviation in paper aging assessment. To correct the temperature effect on furfural partitioning, a furfural correction factor was developed to normalize furfural contents in oil at different temperatures to a reference temperature. The furfural correction factor was verified by experimental data and then introduced into the relation between degree of polymerization of paper and furfural content of oil. Verification results showed that the corrected equation can enhance the accuracy of paper aging estimation at different temperatures. The findings of this work indicated temperature effect on furfural partitioning should be considered when determining the furfural thresholds and evaluating the aging condition of power transformers.Keywords
This publication has 23 references indexed in Scilit:
- Statistical study on the reference values of furanic compounds in power transformersIEEE Electrical Insulation Magazine, 2015
- Thermal aging effects on the moisture equilibrium curves of mineral and mixed oil-paper insulation systemsIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Assessment of the status of insulation during thermal stress accelerated experiments on transformer prototypesIEEE Transactions on Dielectrics and Electrical Insulation, 2006
- Furanic compounds in dielectric liquid samples: review and update of diagnostic interpretation and estimation of insulation ageing2004
- Insulating paper ageing and furfural formation2004
- Review of modern diagnostic techniques for assessing insulation condition in aged transformersIEEE Transactions on Dielectrics and Electrical Insulation, 2003
- Recent advances in the analysis and interpretation of aged insulation from operating power transformers2002
- Degradation of cellulosic insulationin power transformers. Part2: Formation of furan products in insulating oilIEE Proceedings - Science, Measurement and Technology, 2000
- Furfural and ageing: how are they related1999
- Degradation of electrical insulating paper monitored with high performance liquid chromatographyIEEE Transactions on Electrical Insulation, 1990