Reactive DC Sputtered TiO2 Electron Transport Layers for Cadmium‐Free Sb2Se3 Solar Cells
Open Access
- 11 June 2024
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (34)
Abstract
The evolution of Sb2Se3 heterojunction devices away from CdS electron transport layers (ETL) to wide bandgap metal oxide alternatives is a critical target in the development of this emerging photovoltaic material. Metal oxide ETL/Sb2Se3 device performance has historically been limited by relatively low fill factors, despite offering clear advantages with regards to photocurrent collection. In this study, TiO2 ETLs are fabricated via direct current reactive sputtering and tested in complete Sb2Se3 devices. A strong correlation between TiO2 ETL processing conditions and the Sb2Se3 solar cell device response under forward bias conditions is observed and optimized. Numerical device models support experimental evidence of a spike‐like conduction band offset, which can be mediated, provided a sufficiently high conductivity and low interfacial defect density can be achieved in the TiO2 ETL. Ultimately, a SnO2:F/TiO2/Sb2Se3/P3HT/Au device with the reactively sputtered TiO2 ETL delivers an 8.12% power conversion efficiency (η), the highest TiO2/Sb2Se3 device reported to‐date. This is achieved by a substantial reduction in series resistance, driven by improved crystallinity of the reactively sputtered anatase‐TiO2 ETL, whilst maintaining almost maximum current collection for this device architecture.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/T006188/1, EP/W03445X/1)
This publication has 96 references indexed in Scilit:
- Molecular Induced Patching Process Improving Film Quality for High‐Efficiency Cd‐Free Antimony Selenosulfide Solar CellsAdvanced Functional Materials, 2024
- Limitations of the Tauc Plot MethodAdvanced Functional Materials, 2023
- Band Gap and Defect Engineering for High‐Performance Cadmium‐free Sb2(S,Se)3 Solar Cells and ModulesAdvanced Functional Materials, 2022
- Sb2Se3 Thin‐Film Solar Cells Exceeding 10% Power Conversion Efficiency Enabled by Injection Vapor Deposition TechnologyAdvanced Materials, 2022
- Interface Modification Uncovers the Potential Application of SnO2/TiO2 Double Electron Transport Layer in Efficient Cadmium‐Free Sb2Se3 DevicesAdvanced Materials Interfaces, 2022
- Heterojunction Annealing Enabling Record Open‐Circuit Voltage in Antimony Triselenide Solar CellsAdvanced Materials, 2022
- Orientation Engineering in Low‐Dimensional Crystal‐Structural Materials via Seed ScreeningAdvanced Materials, 2019
- Charge Carrier Collection and Contact Selectivity in Solar CellsAdvanced Materials Interfaces, 2019
- Highly Improved Sb2S3 Sensitized‐Inorganic–Organic Heterojunction Solar Cells and Quantification of Traps by Deep‐Level Transient SpectroscopyAdvanced Functional Materials, 2014
- Chalcogenide Photovoltaics2011