Accuracy of Definitive Casts Using 4 Implant-Level Impression Techniques in a Scenario of Multi-Implant System With Different Implant Angulations and Subgingival Alignment Levels
Authors:
- 1 June 2013
- journal article
- research article
- Published by Wolters Kluwer Health in Implant Dentistry
- Vol. 22 (3) , 268-276
Abstract
To evaluate the effect of various implant-level impression techniques on the accuracy of definitive casts for a multiple internal connection implant system with different implant angulations and subgingival depths. Six tapered Screw-Vent implants were placed in a reference model with different angles (0, 15, and 30 degrees) and subgingival positions (0, 1, and 3 mm). Twenty medium-consistency polyether impressions of this model were made with 4 techniques (n = 5 per group): (1) indirect technique, (2) unsplinted direct technique, (3) acrylic resin-splinted direct technique, and (4) metal-splinted direct technique. Impressions were poured with type IV dental stone. The interimplant distances were measured for casts using a coordinate measuring machine and the deviations compared with the reference model were calculated. Data were analyzed using intraclass correlation coefficient, ANOVA and Bonferroni test (α = 0.05). Four impression procedures showed significant differences (P = 0.0001). Only group 4 casts showed no significant differences in comparison with the reference model (P = 0.666) (ANOVA repeated measures). The impression procedure affected the accuracy of definitive casts. The metal-splinted direct technique produced the most accurate casts, followed by acrylic resin-splinted direct, indirect, and unsplinted direct techniques.Keywords
This publication has 26 references indexed in Scilit:
- Effect of Implant Angulation, Connection Length, and Impression Material on the Dimensional Accuracy of Implant Impressions: An In Vitro Comparative StudyClinical Implant Dentistry and Related Research, 2010
- The accuracy of implant impressions: A systematic reviewThe Journal of Prosthetic Dentistry, 2008
- Prosthetic treatment planning on the basis of scientific evidenceJournal of Oral Rehabilitation, 2007
- Accuracy of two impression techniques with angulated implantsThe Journal of Prosthetic Dentistry, 2007
- Comparative Analysis of 4 Impression Techniques for ImplantsImplant Dentistry, 2007
- In Vivo Stress Behavior in Cemented and Screw‐Retained Five‐Unit Implant FPDsJournal of Prosthodontics, 2006
- Human ex vivo bone tissue strains around natural teeth vs. immediate oral implantsClinical Oral Implants Research, 2005
- Stress Distribution in Bone: Single-Unit Implant Prostheses Veneered with Porcelain or a New Composite MaterialImplant Dentistry, 2005
- The influence of functional forces on the biomechanics of implant-supported prostheses—a reviewJournal of Dentistry, 2002
- The Significance Of Passive Framework Fit In Implant Prosthodontics: Current StatusImplant Dentistry, 2001