Optimal Design of Parameters for the Nanofluid/Ultrasonic Atomization Minimal Quantity Lubrication in a Micromilling Process
- 25 November 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 16 (8) , 5202-5212
Abstract
Nanofluid/ultrasonic atomization minimal quantity lubrication (MQL) was used in an SKD11 steel micro-milling process with ultrasonic dispersion. The nanofluid atomizer substantially improved nanofluid reunification and delivery to the cutting zone. The micro-milling cutting force and temperature were used to calculate the signal-to-noise ratio (S/N). Normalization of the S/N in a grey relational analysis obtained a grey correlation coefficient, which was used in a fuzzy analysis to obtain a multiple performance characteristic indexes (MPCI). The MPCI was maximized by optimizing the process parameters for multiple quality characteristics and then comparing the optimized parameters with those in the MQL system. Experimental results indicate that the nanofluid parameters containing the density of nanofluid, feed rate, and distance of nozzle are the most influential control factors, while 3.617 Newton and 117.1 degrees Celsius, respectively, are the optimal combination of parameters. Different lubricating methods were also compared in terms of effects on micro-milling cutting force, micro-milling temperature, micro-milling tool wear, and surface burr. Experiments showed that nanofluid (MWCNTs)/ultrasonic atomization MQL obtained the best results.Keywords
Funding Information
- Ministry of Science and Technology Taiwan (MOST 105-2221-E-151-024-MY3)
This publication has 19 references indexed in Scilit:
- A review on preparation, characterization, properties and applications of nanofluidsRenewable and Sustainable Energy Reviews, 2016
- Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloyJournal of Materials Processing Technology, 2016
- Fusion of Modified Bat Algorithm Soft Computing and Dynamic Model Hard Computing to Online Self-Adaptive Fuzzy Control of Autonomous Mobile RobotsIEEE Transactions on Industrial Informatics, 2016
- Forecasting Rare Faults of Critical Components in LED Epitaxy Plants Using a Hybrid Grey Forecasting and Harmony Search ApproachIEEE Transactions on Industrial Informatics, 2015
- Optimization of machining parameters considering minimum cutting fluid consumptionJournal of Cleaner Production, 2015
- Identification of a friction model for minimum quantity lubrication machiningJournal of Cleaner Production, 2014
- Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-millingJournal of Manufacturing Processes, 2014
- The Effect of Morphology on the Tribological Properties of MoS2 in Liquid ParaffinTribology Letters, 2010
- A mechanistic model of cutting force in the micro end milling processJournal of Materials Processing Technology, 2007
- Mechanism of Clay Tactoid Exfoliation in Epoxy-Clay NanocompositesChemistry of Materials, 1995