Structural GFRP Permanent Forms with T-Shape Ribs for Bridge Decks Supported by Precast Concrete Girders
Authors:
- 1 September 2013
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 18 (9) , 813-826
Abstract
A new concrete bridge deck cast onto glass fiber–reinforced polymer (GFRP) stay-in-place (SIP) structural forms is studied. The forms, which replace the bottom layer of conventional rebar, are essentially flat plates with T-up ribs. They span between support girders spaced at 1,772 mm and are lap-spliced using adhesive and mechanical fasteners. Special attention was given to the detailing of monolithic connections between the deck and girders to simulate continuity. The flange of the supporting concrete girders had a rough surface finish and protruded steel stirrups and mimicked AASHTO Type III girders. Five full-scale decks were tested to (1) compare the novel system with a conventional RC deck, (2) examine the effect of eliminating a top layer of orthogonal GFRP rebar, (3) assess a practice commonly used in bridge deck tests of using simple spans resting on neoprene pads, neglecting connection to girders, and (4) examine a commercially available all-GFRP deck, using the same GFRP panels but with...Keywords
This publication has 12 references indexed in Scilit:
- New Bridge Deck Cast onto Corrugated GFRP Stay-in-Place Structural Forms with Interlocking ConnectionsJournal of Composites for Construction, 2012
- Investigating a Structural Form System for Concrete Girders Using Commercially Available GFRP Sheet-Pile SectionsJournal of Composites for Construction, 2009
- Investigation into the Bond of Glass Fiber–Reinforced Polymer Stay-in-Place Structural Forms to Concrete for Decking ApplicationsTransportation Research Record: Journal of the Transportation Research Board, 2009
- Construction and cost analysis of an FRP reinforced concrete bridge deckConstruction and Building Materials, 2006
- Structural Behavior of FRP Composite Bridge Deck PanelsJournal of Bridge Engineering, 2006
- Performance Comparison of Four Fiber-Reinforced Polymer Deck PanelsJournal of Composites for Construction, 2004
- Advances in fibre‐reinforced polymer composite bridge decksProgress in Structural Engineering and Materials, 2002
- Concrete Bridge Decks Constructed with Fiber-Reinforced Polymer Stay-in-Place Forms and Grid ReinforcingTransportation Research Record: Journal of the Transportation Research Board, 2002
- Combined FRP Reinforcement and Permanent Formwork for Concrete MembersJournal of Composites for Construction, 1998
- Interacting pretensioned concrete form panels for bridge decksPCI Journal, 1975