A MEMS Inertial Switch With Large Scale Bi-Directional Adjustable Threshold Function
- 9 November 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 31 (1) , 124-133
Abstract
An inertial switch with bi-directional adjustable threshold function is designed, and the adjustable threshold is achieved by electrostatic force. Based on Micro-Electro-Mechanical System (MEMS) technology, an all-metal structure inertial switch is fabricated, and the core structure is composed of three-layer parallel plates. Besides, an insulating layer of polyimide is utilized on the top and bottom plates so as to avoid electrostatic breakdown. Typically, the proof-mass as a movable structure also serves as an intermediate plate. Electrostatic forces in different directions are generated by applying voltage on the bottom or top parallel plate electrodes. Through theoretical model and finite element simulation, the force state of the proof-mass during the operating inertial micro-switch is surveyed, and the influence of electrostatic force on the threshold acceleration is also analyzed. The experimental results show that the initial acceleration of the inertial micro-switch is 79 g without bias voltage. When a bias voltage with the range of 0–100 V is applied to the bottom plate, the threshold acceleration varies within the range of 79 g-13 g, and the relationship between voltage and threshold acceleration is negatively correlated. Furthermore, when a bias voltage with the range of 65-100 V is applied to the top plate, the threshold acceleration varies within the range of 170 g-240 g, and threshold acceleration is positively correlated. The experiment is well matched with the theoretical analysis. [2021-0184]Keywords
Funding Information
- National Key Research and Development Program of China (2020YFB2008503)
- National Natural Science Foundation of China (61974088)
- Ministry of Education Key Laboratory of Micro and Nano Systems for Aerospace, Northwestern Polytechnical University
- Center for Advanced Electronic Materials and Devices (AEMD) of Shanghai Jiao Tong University
This publication has 21 references indexed in Scilit:
- A new approach and model for accurate determination of the dynamic pull-in parameters of microbeams actuated by a step voltageJournal of Micromechanics and Microengineering, 2013
- Analysis and elimination of the ‘skip contact’ phenomenon in an inertial micro-switch for prolonging its contact timeJournal of Micromechanics and Microengineering, 2009
- Fluxless silicon-to-alumina bonding using electroplated Au–Sn–Au structure at eutectic compositionMaterials Science and Engineering: A, 2007
- Micro-cantilever shocking-acceleration switches with threshold adjusting and ‘on’-state latching functionsJournal of Micromechanics and Microengineering, 2007
- The dynamic response of resistive microswitches: switching time and bouncingJournal of Micromechanics and Microengineering, 2006
- Design and characterization of inertia-activated electrical micro-switches fabricated and packaged using low-temperature photoresist molded metal-electroplating technologyJournal of Micromechanics and Microengineering, 2003
- Fluxless non-eutectic joints fabricated using gold-tin multilayer compositeIEEE Transactions on Components and Packaging Technologies, 2003
- Acceleration switch with extended holding time using squeeze film effect for side airbag systemsSensors and Actuators A: Physical, 2002
- Additive electroplating technology as a post-CMOS process for the production of MEMS acceleration-threshold switches for transportation applicationsJournal of Micromechanics and Microengineering, 2000
- Airbag application: a microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capabilitySensors and Actuators A: Physical, 1995