Evaluation of Linear Deformation and Unloading Stiffness Characteristics of Asphalt Mixtures Incorporating Various Aggregate Gradations
Open Access
- 8 August 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (16) , 8865
Abstract
Optimum stiffness and linear deformation in the unloading phase are fundamental properties of asphalt mixtures required for the durability of flexible pavements. In this research, blends of six different aggregate gradations were used for two base course (BC) and four wearing course (WC) asphalt mixtures. Stability and indirect tensile strength of resulting asphalt mixtures were evaluated to relate to viscoelastic unloading deformation and resilient moduli (instantaneous (MRI) and total (MRT)) at 25 °C using a 40/50 binder for 0.1 and 0.3 s load durations. Results indicated that an increase in coarse aggregate proportion from 48 to 70% for BC has shown a 12% and 14% increase in MRT for 0.1 and 0.3 s load durations, respectively, and an increase in coarse aggregate proportion from 41 to 57.5% for WC has caused a 26% and 20% increase in MRI for 0.1 and 0.3 s load durations, respectively. The same coarse aggregate proportions showed an increase in linear viscoelastic deformation at 0.1 s load duration from 54.6 to 68.2% for WC and from 53.0 to 62.7% for BC, whereas for 0.3 s load duration linear viscoelastic deformation increased from 58.1 to 69.1% for WC and 64.3 to 69.2% for BC. The findings of this study will assist in the selection of aggregate gradations to be used in wearing and base course asphalt mixtures for pavement design, construction and maintenance.Keywords
This publication has 26 references indexed in Scilit:
- Characteristics of undamaged asphalt mixtures in tension and compressionInternational Journal of Pavement Engineering, 2017
- Laboratory Performance Evaluation of High Modulus Asphalt Concrete Modified with Different AdditivesAdvances in Materials Science and Engineering, 2017
- Stiffness Characterization of Asphalt Mixtures with High Recycled Material Content and Recycling AgentsTransportation Research Record: Journal of the Transportation Research Board, 2017
- Characterization of linear viscoelastic, nonlinear viscoelastic and damage stages of asphalt mixturesConstruction and Building Materials, 2016
- Nonlinear viscoelastic approach to model damage-associated performance behavior of asphaltic mixture and pavement structureCanadian Journal of Civil Engineering, 2013
- Impact of bitumen and aggregate composition on stripping in bituminous mixturesMaterials and Structures, 2006
- Comparing Resilient Modulus and Dynamic Modulus of Hot-Mix Asphalt as Material Properties for Flexible Pavement DesignTransportation Research Record: Journal of the Transportation Research Board, 2006
- Effect of Coarse Aggregate Morphology on the Resilient Modulus of Hot-Mix AsphaltTransportation Research Record: Journal of the Transportation Research Board, 2005
- Comparing back-calculated and laboratory resilient moduli of bituminous paving mixturesCanadian Journal of Civil Engineering, 2004
- Specimen Size Effects on the Diametrical Mechanical Testing of Cylindrical Asphalt MixesJournal of Testing and Evaluation, 1995